EPC Price Check

Does a C-or-better EPC sell for more in TN27 0 (Ashford)?

No measurable EPC premium here. In postcode sector TN27 0 (Ashford), comparing like with like — same floor area, property type, build period and year of sale — the difference is +3.1% (95% range −2.2% to +8.6%): the EPC band itself is not reflected in sale prices here. The raw gap is bigger: C+ homes sold for 3% less per square metre than D–G homes (median £3,559 vs £3,678, 622 sales 2015–2026), mostly because they are different homes. Across England and Wales the like-for-like figure is +1.2%. Data: HM Land Registry Price Paid to 30 September 2026 matched to the EPC register.

Data: sales January 2015 – September 2026, EPC register November 2026, gas 2024 · calculated 5 November 2026 · Methodology and sources

+3.1%like-for-like: no measurable difference (95% range −2.2% to +8.6%)
−3%raw gap per m² (before like-for-like)
622sales matched to a certificate
65%metered gas, % of certificate estimate (rough)

From the raw gap to like-for-like

The homes are not alike: C+ homes here have a median floor area of 163 m² against 112 m² for D–G; the most common build period is 2012 onwards for C+ and before 1900 for D–G; 84% of C+ and 79% of D–G sales are detached or semi-detached houses.

Comparing C+ with D–G homes…Difference95% range
Raw gap per m² (medians)−3%—
Whole price, nothing held equal+23.4%+13.8% to +33.8%
Same floor area+2.0%−2.6% to +6.8%
+ same property type+2.0%−2.1% to +6.1%
+ same build period+6.1%−0.1% to +12.6%
+ same year of sale+3.1%−2.2% to +8.6%

The first row compares median prices per m²; the second compares whole prices; each later row adds one more thing that must be equal, ending with the like-for-like premium (regression of log price; build period from the certificate, 12 bands). The raw gap per m² and the whole-price gap differ because C+ and D–G homes differ in size.

Sold prices by EPC band in TN27 0

EPC band (last certificate before sale)SalesMedian £ per m²
A4too few
B122£3,450
C127£3,721
D190£3,631
E121£3,968
F41£3,032
G17£3,333

A median is shown when a band has at least 10 sales.

C or better vs D–G, by property type

TypeC+ salesC+ £/m²D–G salesD–G £/m²
Detached160£3,721178£3,913
Semi-detached52£3,365114£3,509
Terraced31£3,75954£3,629
Flat / maisonette10£3,14623£2,423

Compared with the wider area

AreaSalesLike-for-like95% range
Sector TN27 0622+3.1%−2.2% to +8.6%
District TN272,189−2.0%−4.4% to +0.5%
England and Wales1,000,000 (sample)+1.2%+0.9% to +1.5%

Average gas use in TN27 0 (2024): meters vs certificates

A rough comparison: the certificate figure is an upper-bound estimate (primary energy including lighting, converted with one factor), so treat the share as an order of magnitude.

Postcodes with published gas data (5+ meters)69 (1,151 meters)
Median gas use per meter (median of postcodes)11,952 kWh
Gas-heated homes with an EPC832
Energy implied by their certificates (median)15,807 kWh
Metered gas as a share of the certificate figure (median of 68 postcodes)65% (middle half 54%–76%)

Certificates by band imply: B 7,673 kWh (170 homes) · C 13,150 kWh (262 homes) · D 20,246 kWh (293 homes) · E 31,847 kWh (91 homes) · F 56,782 kWh (14 homes). Across England and Wales, real use is much closer to the certificate for A–C homes than for D–G homes, so the saving an upgrade promises is usually smaller than the certificate suggests.

Certificate energy = primary energy per m² × floor area ÷ 1.13, for homes whose latest certificate shows mains gas heating; it also covers lighting and other uses, so it is an upper bound for gas. DESNZ gas is weather-corrected and covers all meters in the postcode, with or without a certificate.

Can the local grid take heat pumps in TN27 0?

About 580 of the 664 gas-heated homes with an energy certificate in TN27 0 (87%) could switch to a heat pump before their local substations run out of spare capacity, on UK Power Networks' figures. 4 of the 38 local substations would fill up before every gas-heated home they supply could switch; 1 is already at or over capacity.

Local (street) substations serving homes in the sector38
Already at or over capacity1 (3%)
Their combined spare capacity (demand headroom)≈ 7,480 kVA
Heat pumps that spare capacity could take, at 1.7 kW each≈ 4,400
Gas-heated homes with an EPC on these substations664 (80% of the sector's)
Of them, could switch within the spare capacity≈ 580 (87%)
…if each heat pump adds 3 kW (a cold snap)≈ 430 (65%)

How: each substation's spare capacity (UK Power Networks publishes utilisation in 20% bands; we take the low end of the spare-capacity band) is divided by 1.7 kW, the extra winter peak one heat pump adds once many are spread over a street; a substation can take as many heat pumps as that allows, shared among the gas-heated homes on all its postcodes whose centre lies inside the substation's published supply area. Some substations also serve neighbouring sectors, so their whole capacity is counted here and there. Spare capacity is UK Power Networks' figure as published on 15 June 2026; network operators must still be told about each heat pump, and a full substation means reinforcement (usually a delay), not a refusal. Homes without an energy certificate are not counted. All areas and the method.

622 of 738 house and flat sales in the sector since 2015 (84%) were matched to a certificate.

How this is calculated

Caveats