EPC Price Check

Does a C-or-better EPC sell for more in TF2 0 (Telford and Wrekin)?

No premium here: C+ homes sold for slightly less. In postcode sector TF2 0 (Telford and Wrekin), comparing like with like — same floor area, property type, build period and year of sale — homes rated C or better sold for 4.8% less (95% range −8.8% to −0.7%). The raw gap is different: C+ homes sold for 5% more per square metre than D–G homes (median £2,185 vs £2,090, 390 sales 2015–2026), mostly because they are different homes. Across England and Wales the like-for-like figure is +1.2%. Data: HM Land Registry Price Paid to 30 September 2026 matched to the EPC register.

Data: sales January 2015 – September 2026, EPC register November 2026, gas 2024 · calculated 5 November 2026 · Methodology and sources

−4.8% ▼like-for-like: small discount (95% range −8.8% to −0.7%)
+5%raw gap per m² (before like-for-like)
390sales matched to a certificate
63%metered gas, % of certificate estimate (rough)

From the raw gap to like-for-like

The homes are not alike: C+ homes here have a median floor area of 71 m² against 78 m² for D–G; both groups are most often built in 1950–1966; 76% of C+ and 85% of D–G sales are detached or semi-detached houses.

Comparing C+ with D–G homes…Difference95% range
Raw gap per m² (medians)+5%—
Whole price, nothing held equal−11.3%−19.0% to −2.8%
Same floor area−2.8%−8.9% to +3.7%
+ same property type+2.3%−3.3% to +8.2%
+ same build period−0.9%−6.9% to +5.4%
+ same year of sale−4.8%−8.8% to −0.7%

The first row compares median prices per m²; the second compares whole prices; each later row adds one more thing that must be equal, ending with the like-for-like premium (regression of log price; build period from the certificate, 12 bands). The raw gap per m² and the whole-price gap differ because C+ and D–G homes differ in size.

Sold prices by EPC band in TF2 0

EPC band (last certificate before sale)SalesMedian £ per m²
A1too few
B20£2,522
C110£1,958
D211£2,125
E37£1,925
F7too few
G4too few

A median is shown when a band has at least 10 sales.

C or better vs D–G, by property type

TypeC+ salesC+ £/m²D–G salesD–G £/m²
Detached31£2,54596£2,345
Semi-detached69£1,838124£1,931
Terraced16£2,46239£1,965
Flat / maisonette15£1,7400—

Compared with the wider area

AreaSalesLike-for-like95% range
Sector TF2 0390−4.8%−8.8% to −0.7%
District TF26,355−3.0%−4.4% to −1.6%
England and Wales1,000,000 (sample)+1.2%+0.9% to +1.5%

Average gas use in TF2 0 (2024): meters vs certificates

A rough comparison: the certificate figure is an upper-bound estimate (primary energy including lighting, converted with one factor), so treat the share as an order of magnitude.

Postcodes with published gas data (5+ meters)58 (1,168 meters)
Median gas use per meter (median of postcodes)9,980 kWh
Gas-heated homes with an EPC855
Energy implied by their certificates (median)13,550 kWh
Metered gas as a share of the certificate figure (median of 55 postcodes)63% (middle half 55%–71%)

Certificates by band imply: B 5,841 kWh (69 homes) · C 11,486 kWh (398 homes) · D 17,786 kWh (322 homes) · E 28,602 kWh (57 homes). Across England and Wales, real use is much closer to the certificate for A–C homes than for D–G homes, so the saving an upgrade promises is usually smaller than the certificate suggests.

Certificate energy = primary energy per m² × floor area ÷ 1.13, for homes whose latest certificate shows mains gas heating; it also covers lighting and other uses, so it is an upper bound for gas. DESNZ gas is weather-corrected and covers all meters in the postcode, with or without a certificate.

390 of 410 house and flat sales in the sector since 2015 (95%) were matched to a certificate.

How this is calculated

Caveats