EPC Price Check

Does a C-or-better EPC sell for more in KT10 0 (Elmbridge)?

No measurable EPC premium here. In postcode sector KT10 0 (Elmbridge), comparing like with like — same floor area, property type, build period and year of sale — the difference is −0.6% (95% range −2.9% to +1.7%): the EPC band itself is not reflected in sale prices here. The raw gap is bigger: C+ homes sold for 14% less per square metre than D–G homes (median £5,859 vs £6,843, 1,588 sales 2015–2026), mostly because they are different homes. Across England and Wales the like-for-like figure is +1.2%. Data: HM Land Registry Price Paid to 30 September 2026 matched to the EPC register.

Data: sales January 2015 – September 2026, EPC register November 2026, gas 2024 · calculated 5 November 2026 · Methodology and sources

−0.6%like-for-like: no measurable difference (95% range −2.9% to +1.7%)
−14%raw gap per m² (before like-for-like)
1,588sales matched to a certificate
69%metered gas, % of certificate estimate (rough)

From the raw gap to like-for-like

The homes are not alike: C+ homes here have a median floor area of 96 m² against 124 m² for D–G; the most common build period is 2003–2006 for C+ and 1930–1949 for D–G; 48% of C+ and 87% of D–G sales are detached or semi-detached houses.

Comparing C+ with D–G homes…Difference95% range
Raw gap per m² (medians)−14%—
Whole price, nothing held equal−26.2%−30.2% to −21.9%
Same floor area−14.5%−16.4% to −12.5%
+ same property type−2.4%−4.3% to −0.4%
+ same build period+0.4%−2.1% to +2.9%
+ same year of sale−0.6%−2.9% to +1.7%

The first row compares median prices per m²; the second compares whole prices; each later row adds one more thing that must be equal, ending with the like-for-like premium (regression of log price; build period from the certificate, 12 bands). The raw gap per m² and the whole-price gap differ because C+ and D–G homes differ in size.

Sold prices by EPC band in KT10 0

EPC band (last certificate before sale)SalesMedian £ per m²
A6too few
B181£5,746
C457£5,882
D587£6,778
E296£6,951
F55£6,923
G6too few

A median is shown when a band has at least 10 sales.

C or better vs D–G, by property type

TypeC+ salesC+ £/m²D–G salesD–G £/m²
Detached190£6,234518£6,976
Semi-detached121£6,568304£6,935
Terraced63£5,90775£6,333
Flat / maisonette270£5,31347£4,773

Compared with the wider area

AreaSalesLike-for-like95% range
Sector KT10 01,588−0.6%−2.9% to +1.7%
District KT103,377−1.7%−3.9% to +0.6%
England and Wales1,000,000 (sample)+1.2%+0.9% to +1.5%

Average gas use in KT10 0 (2024): meters vs certificates

A rough comparison: the certificate figure is an upper-bound estimate (primary energy including lighting, converted with one factor), so treat the share as an order of magnitude.

Postcodes with published gas data (5+ meters)184 (3,684 meters)
Median gas use per meter (median of postcodes)18,705 kWh
Gas-heated homes with an EPC2,466
Energy implied by their certificates (median)23,291 kWh
Metered gas as a share of the certificate figure (median of 179 postcodes)69% (middle half 62%–79%)

Certificates by band imply: A 4,242 kWh (11 homes) · B 9,627 kWh (218 homes) · C 14,176 kWh (736 homes) · D 24,976 kWh (972 homes) · E 36,796 kWh (439 homes) · F 53,042 kWh (88 homes). Across England and Wales, real use is much closer to the certificate for A–C homes than for D–G homes, so the saving an upgrade promises is usually smaller than the certificate suggests.

Certificate energy = primary energy per m² × floor area ÷ 1.13, for homes whose latest certificate shows mains gas heating; it also covers lighting and other uses, so it is an upper bound for gas. DESNZ gas is weather-corrected and covers all meters in the postcode, with or without a certificate.

Can the local grid take heat pumps in KT10 0?

About 1,770 of the 2,371 gas-heated homes with an energy certificate in KT10 0 (75%) could switch to a heat pump before their local substations run out of spare capacity, on UK Power Networks' figures. 13 of the 33 local substations would fill up before every gas-heated home they supply could switch.

Local (street) substations serving homes in the sector33
Already at or over capacity0 (0%)
Their combined spare capacity (demand headroom)≈ 6,540 kVA
Heat pumps that spare capacity could take, at 1.7 kW each≈ 3,850
Gas-heated homes with an EPC on these substations2,371 (96% of the sector's)
Of them, could switch within the spare capacity≈ 1,770 (75%)
…if each heat pump adds 3 kW (a cold snap)≈ 1,380 (58%)

How: each substation's spare capacity (UK Power Networks publishes utilisation in 20% bands; we take the low end of the spare-capacity band) is divided by 1.7 kW, the extra winter peak one heat pump adds once many are spread over a street; a substation can take as many heat pumps as that allows, shared among the gas-heated homes on all its postcodes whose centre lies inside the substation's published supply area. Some substations also serve neighbouring sectors, so their whole capacity is counted here and there. Spare capacity is UK Power Networks' figure as published on 15 June 2026; network operators must still be told about each heat pump, and a full substation means reinforcement (usually a delay), not a refusal. Homes without an energy certificate are not counted. All areas and the method.

1,588 of 1,713 house and flat sales in the sector since 2015 (93%) were matched to a certificate.

How this is calculated

Caveats