EPC Price Check

Does a C-or-better EPC sell for more in EN6 2 (Hertsmere)?

No measurable EPC premium here. In postcode sector EN6 2 (Hertsmere), comparing like with like — same floor area, property type, build period and year of sale — the difference is −0.7% (95% range −4.0% to +2.6%): the EPC band itself is not reflected in sale prices here. The raw gap is bigger: C+ homes sold for 8% less per square metre than D–G homes (median £5,347 vs £5,789, 1,054 sales 2015–2026), mostly because they are different homes. Across England and Wales the like-for-like figure is +1.2%. Data: HM Land Registry Price Paid to 30 September 2026 matched to the EPC register.

Data: sales January 2015 – September 2026, EPC register November 2026, gas 2024 · calculated 5 November 2026 · Methodology and sources

−0.7%like-for-like: no measurable difference (95% range −4.0% to +2.6%)
−8%raw gap per m² (before like-for-like)
1,054sales matched to a certificate
69%metered gas, % of certificate estimate (rough)

From the raw gap to like-for-like

The homes are not alike: C+ homes here have a median floor area of 79 m² against 87 m² for D–G; the most common build period is 1950–1966 for C+ and 1930–1949 for D–G; 38% of C+ and 75% of D–G sales are detached or semi-detached houses.

Comparing C+ with D–G homes…Difference95% range
Raw gap per m² (medians)−8%—
Whole price, nothing held equal−17.9%−22.4% to −13.3%
Same floor area−11.6%−14.7% to −8.3%
+ same property type+0.1%−3.0% to +3.2%
+ same build period+1.8%−1.7% to +5.4%
+ same year of sale−0.7%−4.0% to +2.6%

The first row compares median prices per m²; the second compares whole prices; each later row adds one more thing that must be equal, ending with the like-for-like premium (regression of log price; build period from the certificate, 12 bands). The raw gap per m² and the whole-price gap differ because C+ and D–G homes differ in size.

Sold prices by EPC band in EN6 2

EPC band (last certificate before sale)SalesMedian £ per m²
B34£4,527
C249£5,455
D544£5,773
E191£5,806
F29£5,862
G7too few

A median is shown when a band has at least 10 sales.

C or better vs D–G, by property type

TypeC+ salesC+ £/m²D–G salesD–G £/m²
Detached22£5,417162£6,123
Semi-detached86£5,776414£5,915
Terraced85£5,507127£5,014
Flat / maisonette90£4,64368£4,912

Compared with the wider area

AreaSalesLike-for-like95% range
Sector EN6 21,054−0.7%−4.0% to +2.6%
District EN64,347−1.3%−2.6% to 0.0%
England and Wales1,000,000 (sample)+1.2%+0.9% to +1.5%

Average gas use in EN6 2 (2024): meters vs certificates

A rough comparison: the certificate figure is an upper-bound estimate (primary energy including lighting, converted with one factor), so treat the share as an order of magnitude.

Postcodes with published gas data (5+ meters)153 (3,048 meters)
Median gas use per meter (median of postcodes)13,151 kWh
Gas-heated homes with an EPC1,927
Energy implied by their certificates (median)18,832 kWh
Metered gas as a share of the certificate figure (median of 150 postcodes)69% (middle half 61%–78%)

Certificates by band imply: B 6,475 kWh (32 homes) · C 12,832 kWh (629 homes) · D 20,196 kWh (962 homes) · E 29,614 kWh (280 homes) · F 44,860 kWh (23 homes). Across England and Wales, real use is much closer to the certificate for A–C homes than for D–G homes, so the saving an upgrade promises is usually smaller than the certificate suggests.

Certificate energy = primary energy per m² × floor area ÷ 1.13, for homes whose latest certificate shows mains gas heating; it also covers lighting and other uses, so it is an upper bound for gas. DESNZ gas is weather-corrected and covers all meters in the postcode, with or without a certificate.

Can the local grid take heat pumps in EN6 2?

About 1,570 of the 1,852 gas-heated homes with an energy certificate in EN6 2 (85%) could switch to a heat pump before their local substations run out of spare capacity, on UK Power Networks' figures. 7 of the 28 local substations would fill up before every gas-heated home they supply could switch.

Local (street) substations serving homes in the sector28
Already at or over capacity0 (0%)
Their combined spare capacity (demand headroom)≈ 7,550 kVA
Heat pumps that spare capacity could take, at 1.7 kW each≈ 4,440
Gas-heated homes with an EPC on these substations1,852 (96% of the sector's)
Of them, could switch within the spare capacity≈ 1,570 (85%)
…if each heat pump adds 3 kW (a cold snap)≈ 1,360 (74%)

How: each substation's spare capacity (UK Power Networks publishes utilisation in 20% bands; we take the low end of the spare-capacity band) is divided by 1.7 kW, the extra winter peak one heat pump adds once many are spread over a street; a substation can take as many heat pumps as that allows, shared among the gas-heated homes on all its postcodes whose centre lies inside the substation's published supply area. Some substations also serve neighbouring sectors, so their whole capacity is counted here and there. Spare capacity is UK Power Networks' figure as published on 15 June 2026; network operators must still be told about each heat pump, and a full substation means reinforcement (usually a delay), not a refusal. Homes without an energy certificate are not counted. All areas and the method.

1,054 of 1,097 house and flat sales in the sector since 2015 (96%) were matched to a certificate.

How this is calculated

Caveats