Solar panels, heat pumps and insulation in Sloane/Stanley conservation area
In the Sloane/Stanley conservation area (Kensington and Chelsea), external wall insulation needs planning permission, and so does an air source heat pump on a wall or roof facing the road; one at the back or side, internal and loft insulation and solar panels on a roof slope normally do not. An Article 4 direction published by Kensington and Chelsea covers this area but deals with other things (such as changes of use); it does not change the rules below. 771 homes inside the boundary have an energy certificate: 82.9% are solid-wall homes with no wall insulation, 91.2% heat with a gas boiler and 61.9% are rated D–G; 4 have a heat pump. EPC register November 2026; rules as at 21 October 2026.
Data: EPC register November 2026 (latest certificate per home), conservation area boundaries 3 November 2026, permitted development rules as at 21 October 2026 · calculated 5 November 2026 · Methodology and sources
771homes with an energy certificate
82.9%solid walls, no insulation
91.2%heated by a gas boiler
4heat pumps
Article 4: An Article 4 direction published by Kensington and Chelsea covers this area but deals with other things (such as changes of use); it does not change the rules below. (Article 4 - No 100; Article 4 - No 106)
What needs planning permission in Sloane/Stanley
Work (house, not listed)
In a conservation area
Rule
Air source heat pump on a wall or roof facing the road, or nearer the road than the house
Planning permission needed
Part 14 Class G, G.1(j)
Air source heat pump at the back or side (outdoor unit up to 1.5 m³, MCS Planning Standards, one per house — two on a detached house)
No permission needed (permitted development)
Part 14 Class G
Solar panels on a pitched roof (up to 0.2 m proud, not above the ridge)
No permission needed (permitted development)
Part 14 Class A, A.2(c)
Solar panels on a wall, balcony or roof enclosure facing the road
Planning permission needed
Part 14 Class A, A.2(e)
Solar panels on a flat roof (up to 0.6 m above the roof)
Replacement windows and doors of similar appearance
No permission needed (permitted development)
Part 1 Class A, A.3(a)
Listed buildings: none recorded inside the boundary; on a listed building, solar panels and heat pumps are not permitted development and need listed building consent.
Flats: 67% of the certified homes here are flats or maisonettes. Homes in a block of flats have no householder rights for alterations; heat pumps and solar have their own, tighter rules for blocks of flats.
The homes in the area (latest certificate per home, n = 771)
Walls
Homes
Share
Solid wall (brick or stone), no insulation
639
82.9%
Cavity wall, insulated (as built or unspecified)
35
4.5%
Cavity wall, unfilled
28
3.6%
Cavity wall, filled
20
2.6%
Modern wall (U-value from the design)
14
1.8%
Solid wall, internal insulation
11
1.4%
Timber frame
7
0.9%
Cavity wall, partly insulated
6
0.8%
Other or not known
4
0.5%
Solid wall, insulated
4
0.5%
Solid wall, partly insulated
3
0.4%
Heating
Homes
Share
Gas boiler
703
91.2%
Electric (storage heaters, panels, boiler)
54
7.0%
Communal heating
10
1.3%
Heat pump
4
0.5%
Loft / roof insulation
Homes
Share
No insulation
188
24.4%
Under 200 mm
89
11.5%
200 mm or more
34
4.4%
Insulated (depth not recorded)
109
14.1%
Flat or other home above
338
43.8%
Other
13
1.7%
Windows
Homes
Share
Double glazed
508
65.9%
Single glazed
204
26.5%
Secondary glazing
53
6.9%
Triple glazed
6
0.8%
CDE
Energy rating: B 13 (1.7%) · C 281 (36.4%) · D 337 (43.7%) · E 119 (15.4%) · F 18 (2.3%) · G 3 (0.4%). Houses and bungalows: 33% of the homes; solar panels on 0.1% of the certificates. Most common build period on the certificates: before 1900. Designated: 1 January 1969.
Compared with Kensington and Chelsea and England
Share of homes
Sloane/Stanley
All 44 areas in Kensington and Chelsea
England
Solid walls, no insulation
82.9%
79.7%
48.7%
Gas boiler
91.2%
72.9%
66.4%
Rated D–G
61.9%
—
56.5%
Caveats
Certificates describe a home when it was assessed; 55% of these are from 2020 or later (latest 31 October 2026). “No insulation (assumed)” is the assessor's default for older walls.
The rules are England's national permitted development rules (General Permitted Development Order 2015, Schedule 2, as at 21 October 2026). They do not cover building regulations or a council's own conditions. This is not a planning decision: ask Kensington and Chelsea if in doubt.
Boundary: Royal Borough of Kensington and Chelsea via planning.data.gov.uk (entity 44012782, reference 24, 12.1 ha); the council's appraisal or map. Homes are placed by the coordinates of their UPRN (OS Open UPRN); addresses are not shown.