Solar panels, heat pumps and insulation in Walham Grove conservation area
In the Walham Grove conservation area (Hammersmith & Fulham), external wall insulation needs planning permission, and so does an air source heat pump on a wall or roof facing the road; one at the back or side, internal and loft insulation and solar panels on a roof slope normally do not. 48 homes inside the boundary have an energy certificate: 88% are solid-wall homes with no wall insulation, 98% heat with a gas boiler and 67% are rated D–G; 0 have a heat pump. EPC register November 2026; rules as at 21 October 2026.
Data: EPC register November 2026 (latest certificate per home), conservation area boundaries 3 November 2026, permitted development rules as at 21 October 2026 · calculated 5 November 2026 · Methodology and sources
48homes with an energy certificate
88%solid walls, no insulation
98%heated by a gas boiler
0heat pumps
Article 4: Hammersmith & Fulham does not publish Article 4 areas on planning.data.gov.uk — check with the council.
What needs planning permission in Walham Grove
Work (house, not listed)
In a conservation area
Rule
Air source heat pump on a wall or roof facing the road, or nearer the road than the house
Planning permission needed
Part 14 Class G, G.1(j)
Air source heat pump at the back or side (outdoor unit up to 1.5 m³, MCS Planning Standards, one per house — two on a detached house)
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 14 Class G
Solar panels on a pitched roof (up to 0.2 m proud, not above the ridge)
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 14 Class A, A.2(c)
Solar panels on a wall, balcony or roof enclosure facing the road
Planning permission needed
Part 14 Class A, A.2(e)
Solar panels on a flat roof (up to 0.6 m above the roof)
Prior approval of appearance from the council, unless an Article 4 direction removes it — check with the council
Replacement windows and doors of similar appearance
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 1 Class A, A.3(a)
Listed buildings: none recorded inside the boundary; on a listed building, solar panels and heat pumps are not permitted development and need listed building consent.
Flats: 40% of the certified homes here are flats or maisonettes. Homes in a block of flats have no householder rights for alterations; heat pumps and solar have their own, tighter rules for blocks of flats.
The homes in the area (latest certificate per home, n = 48)
Walls
Homes
Share
Solid wall (brick or stone), no insulation
42
88%
Cavity wall, unfilled
2
4%
Cavity wall, insulated (as built or unspecified)
1
2%
Cavity wall, partly insulated
1
2%
Other or not known
1
2%
Solid wall, internal insulation
1
2%
Heating
Homes
Share
Gas boiler
47
98%
Communal heating
1
2%
Loft / roof insulation
Homes
Share
No insulation
17
35%
Under 200 mm
9
19%
Insulated (depth not recorded)
13
27%
Flat or other home above
9
19%
Windows
Homes
Share
Double glazed
37
77%
Single glazed
11
23%
CDE
Energy rating: C 16 (33%) · D 20 (42%) · E 11 (23%) · F 1 (2%). Houses and bungalows: 60% of the homes; solar panels on 0% of the certificates. Most common build period on the certificates: 1900-1929.
Compared with Hammersmith & Fulham and England
Share of homes
Walham Grove
All 46 areas in Hammersmith & Fulham
England
Solid walls, no insulation
88%
65.3%
48.7%
Gas boiler
98%
70.7%
66.4%
Rated D–G
67%
—
56.5%
Caveats
Certificates describe a home when it was assessed; 56% of these are from 2020 or later (latest 20 October 2026). “No insulation (assumed)” is the assessor's default for older walls.
The rules are England's national permitted development rules (General Permitted Development Order 2015, Schedule 2, as at 21 October 2026). They do not cover building regulations or a council's own conditions. This is not a planning decision: ask Hammersmith & Fulham if in doubt.
Boundary: London Borough of Hammersmith & Fulham via planning.data.gov.uk (entity 44008385, reference 9, 1.4 ha). Homes are placed by the coordinates of their UPRN (OS Open UPRN); addresses are not shown.