Solar panels, heat pumps and insulation in Grayshott (41-1) conservation area
In the Grayshott conservation area (East Hampshire), external wall insulation needs planning permission, and so does an air source heat pump on a wall or roof facing the road; one at the back or side, internal and loft insulation and solar panels on a roof slope normally do not. 52 homes inside the boundary have an energy certificate: 4% are solid-wall homes with no wall insulation, 87% heat with a gas boiler and 38% are rated D–G; 0 have a heat pump. EPC register November 2026; rules as at 21 October 2026.
Data: EPC register November 2026 (latest certificate per home), conservation area boundaries 3 November 2026, permitted development rules as at 21 October 2026 · calculated 5 November 2026 · Methodology and sources
52homes with an energy certificate
4%solid walls, no insulation
87%heated by a gas boiler
0heat pumps
Article 4: East Hampshire publishes its Article 4 areas on planning.data.gov.uk and none overlaps this area; a direction can still exist on paper, so check with the council.
What needs planning permission in Grayshott
Work (house, not listed)
In a conservation area
Rule
Air source heat pump on a wall or roof facing the road, or nearer the road than the house
Planning permission needed
Part 14 Class G, G.1(j)
Air source heat pump at the back or side (outdoor unit up to 1.5 m³, MCS Planning Standards, one per house — two on a detached house)
No permission needed (permitted development)
Part 14 Class G
Solar panels on a pitched roof (up to 0.2 m proud, not above the ridge)
No permission needed (permitted development)
Part 14 Class A, A.2(c)
Solar panels on a wall, balcony or roof enclosure facing the road
Planning permission needed
Part 14 Class A, A.2(e)
Solar panels on a flat roof (up to 0.6 m above the roof)
Replacement windows and doors of similar appearance
No permission needed (permitted development)
Part 1 Class A, A.3(a)
Listed buildings: none recorded inside the boundary; on a listed building, solar panels and heat pumps are not permitted development and need listed building consent.
Flats: 75% of the certified homes here are flats or maisonettes. Homes in a block of flats have no householder rights for alterations; heat pumps and solar have their own, tighter rules for blocks of flats.
The homes in the area (latest certificate per home, n = 52)
Walls
Homes
Share
Cavity wall, insulated (as built or unspecified)
16
31%
Cavity wall, unfilled
12
23%
Timber frame
8
15%
Modern wall (U-value from the design)
6
12%
Cavity wall, filled
5
10%
Solid wall (brick or stone), no insulation
2
4%
Solid wall, internal insulation
2
4%
Cavity wall, internal or external insulation
1
2%
Heating
Homes
Share
Gas boiler
45
87%
Electric (storage heaters, panels, boiler)
7
13%
Loft / roof insulation
Homes
Share
No insulation
4
8%
Under 200 mm
11
21%
200 mm or more
10
19%
Insulated (depth not recorded)
14
27%
Flat or other home above
7
13%
Other
6
12%
Windows
Homes
Share
Double glazed
52
100%
BCD
Energy rating: B 8 (15%) · C 24 (46%) · D 16 (31%) · E 4 (8%). Houses and bungalows: 25% of the homes; solar panels on 0% of the certificates. Most common build period on the certificates: 1900-1929. Designated: 18 January 2011.
Compared with East Hampshire and England
Share of homes
Grayshott
All 57 areas in East Hampshire
England
Solid walls, no insulation
4%
27.7%
48.7%
Gas boiler
87%
65.9%
66.4%
Rated D–G
38%
—
56.5%
Caveats
Certificates describe a home when it was assessed; 58% of these are from 2020 or later (latest 16 October 2026). “No insulation (assumed)” is the assessor's default for older walls.
The rules are England's national permitted development rules (General Permitted Development Order 2015, Schedule 2, as at 21 October 2026). They do not cover building regulations or a council's own conditions. This is not a planning decision: ask East Hampshire if in doubt.
Boundary: East Hampshire District Council via planning.data.gov.uk (entity 44016425, reference 41-1, 1.6 ha); the council's appraisal or map. Homes are placed by the coordinates of their UPRN (OS Open UPRN); addresses are not shown.