EPC Price Check

Does a C-or-better EPC sell for more in TS3 6 (Middlesbrough)?

Too few comparable sales here for a reliable like-for-like figure. In postcode sector TS3 6 (Middlesbrough), comparing like with like — same floor area, property type, build period and year of sale — there are too few comparable sales in each group for a reliable figure; for district TS3 as a whole the like-for-like difference is +1.3% (95% range −1.4% to +4.2%). The raw gap is bigger: C+ homes sold for 78% more per square metre than D–G homes (median £1,064 vs £596, 544 sales 2015–2026), mostly because they are different homes. Across England and Wales the like-for-like figure is +1.2%. Data: HM Land Registry Price Paid to 30 September 2026 matched to the EPC register.

Data: sales January 2015 – September 2026, EPC register November 2026, gas 2024 · calculated 5 November 2026 · Methodology and sources

+1.3%like-for-like in district TS3 (95% range −1.4% to +4.2%); too few sales in this sector
+78%raw gap per m² (before like-for-like)
544sales matched to a certificate
51%metered gas, % of certificate estimate (rough)

From the raw gap to like-for-like

The homes are not alike: C+ homes here have a median floor area of 70 m² against 72 m² for D–G; both groups are most often built in 1900–1929; 12% of C+ and 5% of D–G sales are detached or semi-detached houses.

This sector has fewer than 150 matched sales, fewer than 30 in one group, or an estimate too imprecise or implausibly large to trust, so the like-for-like comparison is not shown; the district figure is above.

Sold prices by EPC band in TS3 6

EPC band (last certificate before sale)SalesMedian £ per m²
B2too few
C82£1,063
D257£671
E165£563
F20£419
G18£558

A median is shown when a band has at least 10 sales.

C or better vs D–G, by property type

TypeC+ salesC+ £/m²D–G salesD–G £/m²
Detached0—2—
Semi-detached10£1,00520£980
Terraced70£1,070437£588
Flat / maisonette4—1—

Compared with the wider area

AreaSalesLike-for-like95% range
Sector TS3 6544too few—
District TS32,508+1.3%−1.4% to +4.2%
England and Wales1,000,000 (sample)+1.2%+0.9% to +1.5%

Average gas use in TS3 6 (2024): meters vs certificates

A rough comparison: the certificate figure is an upper-bound estimate (primary energy including lighting, converted with one factor), so treat the share as an order of magnitude.

Postcodes with published gas data (5+ meters)90 (1,482 meters)
Median gas use per meter (median of postcodes)7,619 kWh
Gas-heated homes with an EPC1,443
Energy implied by their certificates (median)16,156 kWh
Metered gas as a share of the certificate figure (median of 89 postcodes)51% (middle half 39%–60%)

Certificates by band imply: B 8,148 kWh (45 homes) · C 11,575 kWh (491 homes) · D 18,170 kWh (646 homes) · E 26,551 kWh (237 homes) · F 36,095 kWh (16 homes). Across England and Wales, real use is much closer to the certificate for A–C homes than for D–G homes, so the saving an upgrade promises is usually smaller than the certificate suggests.

Certificate energy = primary energy per m² × floor area ÷ 1.13, for homes whose latest certificate shows mains gas heating; it also covers lighting and other uses, so it is an upper bound for gas. DESNZ gas is weather-corrected and covers all meters in the postcode, with or without a certificate.

544 of 569 house and flat sales in the sector since 2015 (96%) were matched to a certificate.

How this is calculated

Caveats