EPC Price Check

Does a C-or-better EPC sell for more in L3 9 (Liverpool)?

Too few comparable sales here for a reliable like-for-like figure. In postcode sector L3 9 (Liverpool), comparing like with like — same floor area, property type, build period and year of sale — there are too few comparable sales in each group for a reliable figure; for district L3 as a whole the like-for-like difference is +6.9% (95% range +3.5% to +10.4%). The raw gap is bigger: C+ homes sold for 30% more per square metre than D–G homes (median £2,534 vs £1,949, 205 sales 2015–2026), mostly because they are different homes. Across England and Wales the like-for-like figure is +1.2%. Data: HM Land Registry Price Paid to 30 September 2026 matched to the EPC register.

Data: sales January 2015 – September 2026, EPC register November 2026, gas 2024 · calculated 5 November 2026 · Methodology and sources

+6.9%like-for-like in district L3 (95% range +3.5% to +10.4%); too few sales in this sector
+30%raw gap per m² (before like-for-like)
205sales matched to a certificate
102%metered gas, % of certificate estimate (rough)

From the raw gap to like-for-like

The homes are not alike: C+ homes here have a median floor area of 68 m² against 76 m² for D–G; the most common build period is 1900–1929 for C+ and before 1900 for D–G.

This sector has fewer than 150 matched sales, fewer than 30 in one group, or an estimate too imprecise or implausibly large to trust, so the like-for-like comparison is not shown; the district figure is above.

Sold prices by EPC band in L3 9

EPC band (last certificate before sale)SalesMedian £ per m²
B33£2,531
C116£2,546
D36£2,049
E18£1,777
F1too few
G1too few

A median is shown when a band has at least 10 sales.

C or better vs D–G, by property type

TypeC+ salesC+ £/m²D–G salesD–G £/m²
Flat / maisonette149£2,53456£1,949

Compared with the wider area

AreaSalesLike-for-like95% range
Sector L3 9205too few—
District L32,358+6.9%+3.5% to +10.4%
England and Wales1,000,000 (sample)+1.2%+0.9% to +1.5%

Average gas use in L3 9 (2024): meters vs certificates

A rough comparison: the certificate figure is an upper-bound estimate (primary energy including lighting, converted with one factor), so treat the share as an order of magnitude.

Postcodes with published gas data (5+ meters)2 (10 meters)
Median gas use per meter (median of postcodes)20,985 kWh
Gas-heated homes with an EPC6
Energy implied by their certificates (median)8,992 kWh
Metered gas as a share of the certificate figure (median of 1 postcodes)102% (middle half 102%–102%)

Certificate energy = primary energy per m² × floor area ÷ 1.13, for homes whose latest certificate shows mains gas heating; it also covers lighting and other uses, so it is an upper bound for gas. DESNZ gas is weather-corrected and covers all meters in the postcode, with or without a certificate.

205 of 455 house and flat sales in the sector since 2015 (45%) were matched to a certificate.

How this is calculated

Caveats