EPC Price Check

Does a C-or-better EPC sell for more in EC1A 9 (City of London)?

Too few comparable sales here for a reliable like-for-like figure. In postcode sector EC1A 9 (City of London), comparing like with like — same floor area, property type, build period and year of sale — there are too few comparable sales in each group for a reliable figure; for district EC1A as a whole the like-for-like difference is +5.4% (95% range −2.1% to +13.4%). The raw gap is bigger: C+ homes sold for 16% more per square metre than D–G homes (median £13,421 vs £11,556, 61 sales 2015–2026), mostly because they are different homes. Across England and Wales the like-for-like figure is +1.2%. Data: HM Land Registry Price Paid to 30 September 2026 matched to the EPC register.

Data: sales January 2015 – September 2026, EPC register November 2026, gas 2024 · calculated 5 November 2026 · Methodology and sources

+5.4%like-for-like in district EC1A (95% range −2.1% to +13.4%); too few sales in this sector
+16%raw gap per m² (before like-for-like)
61sales matched to a certificate
69%metered gas, % of certificate estimate (rough)

From the raw gap to like-for-like

The homes are not alike: C+ homes here have a median floor area of 52 m² against 46 m² for D–G; the most common build period is 1900–1929 for C+ and before 1900 for D–G.

This sector has fewer than 150 matched sales, fewer than 30 in one group, or an estimate too imprecise or implausibly large to trust, so the like-for-like comparison is not shown; the district figure is above.

Sold prices by EPC band in EC1A 9

EPC band (last certificate before sale)SalesMedian £ per m²
B4too few
C41£14,567
D8too few
E6too few
F1too few
G1too few

A median is shown when a band has at least 10 sales.

C or better vs D–G, by property type

TypeC+ salesC+ £/m²D–G salesD–G £/m²
Flat / maisonette45£13,42116£11,556

Compared with the wider area

AreaSalesLike-for-like95% range
Sector EC1A 961too few—
District EC1A377+5.4%−2.1% to +13.4%
England and Wales1,000,000 (sample)+1.2%+0.9% to +1.5%

Average gas use in EC1A 9 (2024): meters vs certificates

A rough comparison: the certificate figure is an upper-bound estimate (primary energy including lighting, converted with one factor), so treat the share as an order of magnitude.

Postcodes with published gas data (5+ meters)4 (39 meters)
Median gas use per meter (median of postcodes)6,366 kWh
Gas-heated homes with an EPC22
Energy implied by their certificates (median)9,105 kWh
Metered gas as a share of the certificate figure (median of 2 postcodes)69% (middle half 64%–75%)

Certificates by band imply: C 8,129 kWh (12 homes). Across England and Wales, real use is much closer to the certificate for A–C homes than for D–G homes, so the saving an upgrade promises is usually smaller than the certificate suggests.

Certificate energy = primary energy per m² × floor area ÷ 1.13, for homes whose latest certificate shows mains gas heating; it also covers lighting and other uses, so it is an upper bound for gas. DESNZ gas is weather-corrected and covers all meters in the postcode, with or without a certificate.

61 of 71 house and flat sales in the sector since 2015 (86%) were matched to a certificate.

How this is calculated

Caveats