Solar panels, heat pumps and insulation in Poulton-le-Fylde conservation area
In the Poulton-le-Fylde conservation area (Wyre), external wall insulation needs planning permission, and so does an air source heat pump on a wall or roof facing the road; one at the back or side, internal and loft insulation and solar panels on a roof slope normally do not. The area has 11 listed buildings; on a listed building solar panels and heat pumps are not permitted development at all and need planning permission and listed building consent. 430 homes inside the boundary have an energy certificate: 10.9% are solid-wall homes with no wall insulation, 71.4% heat with a gas boiler and 67.2% are rated D–G; 1 has a heat pump. EPC register November 2026; rules as at 21 October 2026.
Data: EPC register November 2026 (latest certificate per home), conservation area boundaries 3 November 2026, permitted development rules as at 21 October 2026 · calculated 5 November 2026 · Methodology and sources
430homes with an energy certificate
10.9%solid walls, no insulation
71.4%heated by a gas boiler
1heat pumps
Article 4: Wyre does not publish Article 4 areas on planning.data.gov.uk — check with the council.
What needs planning permission in Poulton-le-Fylde
Work (house, not listed)
In a conservation area
Rule
Air source heat pump on a wall or roof facing the road, or nearer the road than the house
Planning permission needed
Part 14 Class G, G.1(j)
Air source heat pump at the back or side (outdoor unit up to 1.5 m³, MCS Planning Standards, one per house — two on a detached house)
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 14 Class G
Solar panels on a pitched roof (up to 0.2 m proud, not above the ridge)
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 14 Class A, A.2(c)
Solar panels on a wall, balcony or roof enclosure facing the road
Planning permission needed
Part 14 Class A, A.2(e)
Solar panels on a flat roof (up to 0.6 m above the roof)
Prior approval of appearance from the council, unless an Article 4 direction removes it — check with the council
Replacement windows and doors of similar appearance
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 1 Class A, A.3(a)
Listed buildings: 11 in the area (grade I: 0, II*: 1). The table is for houses that are not listed: on a listed building, solar panels and air source heat pumps are not permitted development at all (they need planning permission), and any of these works needs listed building consent.
Flats: 43% of the certified homes here are flats or maisonettes. Homes in a block of flats have no householder rights for alterations; heat pumps and solar have their own, tighter rules for blocks of flats.
The homes in the area (latest certificate per home, n = 430)
Walls
Homes
Share
Cavity wall, unfilled
189
44.0%
Cavity wall, insulated (as built or unspecified)
84
19.5%
Cavity wall, filled
61
14.2%
Solid wall (brick or stone), no insulation
47
10.9%
Modern wall (U-value from the design)
31
7.2%
Cavity wall, internal or external insulation
5
1.2%
Timber frame
5
1.2%
Solid wall, internal insulation
4
0.9%
Cavity wall, partly insulated
2
0.5%
Solid wall, external insulation
1
0.2%
Solid wall, insulated
1
0.2%
Heating
Homes
Share
Gas boiler
307
71.4%
Electric (storage heaters, panels, boiler)
118
27.4%
Solid fuel (wood, coal)
2
0.5%
Communal heating
1
0.2%
Heat pump
1
0.2%
LPG
1
0.2%
Loft / roof insulation
Homes
Share
No insulation
82
19.1%
Under 200 mm
85
19.8%
200 mm or more
107
24.9%
Insulated (depth not recorded)
46
10.7%
Flat or other home above
92
21.4%
Other
18
4.2%
Windows
Homes
Share
Double glazed
409
95.1%
Single glazed
15
3.5%
Triple glazed
5
1.2%
Secondary glazing
1
0.2%
BCDE
Energy rating: B 41 (9.5%) · C 100 (23.3%) · D 180 (41.9%) · E 87 (20.2%) · F 15 (3.5%) · G 7 (1.6%). Houses and bungalows: 57% of the homes; solar panels on 1.4% of the certificates. Most common build period on the certificates: 1900-1929. Designated: 1 January 1975.
Compared with Wyre and England
Share of homes
Poulton-le-Fylde
All 6 areas in Wyre
England
Solid walls, no insulation
10.9%
19.1%
48.7%
Gas boiler
71.4%
76.0%
66.4%
Rated D–G
67.2%
—
56.5%
Caveats
Certificates describe a home when it was assessed; 53% of these are from 2020 or later (latest 22 October 2026). “No insulation (assumed)” is the assessor's default for older walls.
The rules are England's national permitted development rules (General Permitted Development Order 2015, Schedule 2, as at 21 October 2026). They do not cover building regulations or a council's own conditions. This is not a planning decision: ask Wyre if in doubt.
Boundary: Wyre Borough Council via planning.data.gov.uk (entity 44000226, reference 55, 29.4 ha); the council's appraisal or map. Homes are placed by the coordinates of their UPRN (OS Open UPRN); addresses are not shown.