EPC Price Check

Solar panels, heat pumps and insulation in Hambledon A & B conservation area

In the Hambledon A & B conservation area (Waverley), external wall insulation needs planning permission, and so does an air source heat pump on a wall or roof facing the road; one at the back or side, internal and loft insulation and solar panels on a roof slope normally do not. The area has 16 listed buildings; on a listed building solar panels and heat pumps are not permitted development at all and need planning permission and listed building consent. 60 homes inside the boundary have an energy certificate: 43% are solid-wall homes with no wall insulation, 27% heat with a gas boiler and 92% are rated D–G; 3 have a heat pump. EPC register November 2026; rules as at 21 October 2026.

Data: EPC register November 2026 (latest certificate per home), conservation area boundaries 3 November 2026, permitted development rules as at 21 October 2026 · calculated 5 November 2026 · Methodology and sources

60homes with an energy certificate
43%solid walls, no insulation
27%heated by a gas boiler
3heat pumps

Article 4: Waverley publishes its Article 4 areas on planning.data.gov.uk and none overlaps this area; a direction can still exist on paper, so check with the council.

What needs planning permission in Hambledon A & B

Work (house, not listed)In a conservation areaRule
Air source heat pump on a wall or roof facing the road, or nearer the road than the housePlanning permission neededPart 14 Class G, G.1(j)
Air source heat pump at the back or side (outdoor unit up to 1.5 m³, MCS Planning Standards, one per house — two on a detached house)No permission needed (permitted development)Part 14 Class G
Solar panels on a pitched roof (up to 0.2 m proud, not above the ridge)No permission needed (permitted development)Part 14 Class A, A.2(c)
Solar panels on a wall, balcony or roof enclosure facing the roadPlanning permission neededPart 14 Class A, A.2(e)
Solar panels on a flat roof (up to 0.6 m above the roof)Prior approval of appearance from the councilPart 14 Class A, condition A(ba)
External wall insulation (render, cladding, timber, tiles)Planning permission neededPart 1 Class A, A.2(a)
Internal wall insulation, loft insulation, cavity wall insulationNot development: no planning permission—
Replacement windows and doors of similar appearanceNo permission needed (permitted development)Part 1 Class A, A.3(a)

The homes in the area (latest certificate per home, n = 60)

WallsHomesShare
Solid wall (brick or stone), no insulation2643%
Cavity wall, unfilled1118%
Cavity wall, filled1017%
Modern wall (U-value from the design)47%
Timber frame47%
Solid wall, internal insulation35%
Cavity wall, insulated (as built or unspecified)23%
HeatingHomesShare
Oil1830%
Gas boiler1627%
Electric (storage heaters, panels, boiler)1017%
LPG712%
Communal heating47%
Heat pump35%
Solid fuel (wood, coal)23%
Loft / roof insulationHomesShare
No insulation1220%
Under 200 mm2440%
200 mm or more1423%
Insulated (depth not recorded)58%
Flat or other home above12%
Other47%
WindowsHomesShare
Double glazed4473%
Single glazed1220%
Secondary glazing47%

Energy rating: B 1 (2%) · C 4 (7%) · D 19 (32%) · E 23 (38%) · F 9 (15%) · G 4 (7%). Houses and bungalows: 88% of the homes; solar panels on 0% of the certificates. Most common build period on the certificates: before 1900. Designated: 1 January 1974.

Compared with Waverley and England

Share of homesHambledon A & BAll 44 areas in WaverleyEngland
Solid walls, no insulation43%37.8%48.7%
Gas boiler27%74.3%66.4%
Rated D–G92%—56.5%

Caveats

All conservation areas in Waverley · The rules for every conservation area

Guides: Heat pumps · Solar panels · External wall insulation · Replacement windows · Am I in a conservation area? Postcode checker