Solar panels, heat pumps and insulation in Faringdon conservation area
In the Faringdon conservation area (Vale of White Horse), external wall insulation needs planning permission, and so does an air source heat pump on a wall or roof facing the road; one at the back or side, internal and loft insulation and solar panels on a roof slope normally do not. The area has 111 listed buildings; on a listed building solar panels and heat pumps are not permitted development at all and need planning permission and listed building consent. 516 homes inside the boundary have an energy certificate: 48.3% are solid-wall homes with no wall insulation, 70.2% heat with a gas boiler and 55.6% are rated D–G; 4 have a heat pump. EPC register November 2026; rules as at 21 October 2026.
Data: EPC register November 2026 (latest certificate per home), conservation area boundaries 3 November 2026, permitted development rules as at 21 October 2026 · calculated 5 November 2026 · Methodology and sources
516homes with an energy certificate
48.3%solid walls, no insulation
70.2%heated by a gas boiler
4heat pumps
Article 4: Vale of White Horse does not publish Article 4 areas on planning.data.gov.uk — check with the council.
What needs planning permission in Faringdon
Work (house, not listed)
In a conservation area
Rule
Air source heat pump on a wall or roof facing the road, or nearer the road than the house
Planning permission needed
Part 14 Class G, G.1(j)
Air source heat pump at the back or side (outdoor unit up to 1.5 m³, MCS Planning Standards, one per house — two on a detached house)
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 14 Class G
Solar panels on a pitched roof (up to 0.2 m proud, not above the ridge)
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 14 Class A, A.2(c)
Solar panels on a wall, balcony or roof enclosure facing the road
Planning permission needed
Part 14 Class A, A.2(e)
Solar panels on a flat roof (up to 0.6 m above the roof)
Prior approval of appearance from the council, unless an Article 4 direction removes it — check with the council
Replacement windows and doors of similar appearance
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 1 Class A, A.3(a)
Listed buildings: 111 in the area (grade I: 2, II*: 2). The table is for houses that are not listed: on a listed building, solar panels and air source heat pumps are not permitted development at all (they need planning permission), and any of these works needs listed building consent.
Flats: 51% of the certified homes here are flats or maisonettes. Homes in a block of flats have no householder rights for alterations; heat pumps and solar have their own, tighter rules for blocks of flats.
The homes in the area (latest certificate per home, n = 516)
Walls
Homes
Share
Solid wall (brick or stone), no insulation
249
48.3%
Cavity wall, insulated (as built or unspecified)
143
27.8%
Modern wall (U-value from the design)
30
5.8%
Timber frame
22
4.3%
Solid wall, insulated
20
3.9%
Cavity wall, filled
15
2.9%
Cavity wall, unfilled
15
2.9%
Cavity wall, partly insulated
10
1.9%
Solid wall, internal insulation
7
1.4%
Solid wall, partly insulated
2
0.4%
Cavity wall, internal or external insulation
1
0.2%
Other or not known
1
0.2%
Heating
Homes
Share
Gas boiler
362
70.2%
Electric (storage heaters, panels, boiler)
145
28.1%
Heat pump
4
0.8%
Oil
2
0.4%
Communal heating
1
0.2%
LPG
1
0.2%
Solid fuel (wood, coal)
1
0.2%
Loft / roof insulation
Homes
Share
No insulation
56
10.9%
Under 200 mm
126
24.4%
200 mm or more
111
21.5%
Insulated (depth not recorded)
65
12.6%
Flat or other home above
133
25.8%
Other
25
4.8%
Windows
Homes
Share
Double glazed
404
78.3%
Single glazed
90
17.4%
Secondary glazing
22
4.3%
CDE
Energy rating: B 27 (5.2%) · C 202 (39.1%) · D 202 (39.1%) · E 65 (12.6%) · F 16 (3.1%) · G 4 (0.8%). Houses and bungalows: 49% of the homes; solar panels on 0.4% of the certificates. Most common build period on the certificates: before 1900. Designated: 17 September 1969.
Compared with Vale of White Horse and England
Share of homes
Faringdon
All 54 areas in Vale of White Horse
England
Solid walls, no insulation
48.3%
39.8%
48.7%
Gas boiler
70.2%
56.2%
66.4%
Rated D–G
55.6%
—
56.5%
Caveats
Certificates describe a home when it was assessed; 53% of these are from 2020 or later (latest 29 October 2026). “No insulation (assumed)” is the assessor's default for older walls.
The rules are England's national permitted development rules (General Permitted Development Order 2015, Schedule 2, as at 21 October 2026). They do not cover building regulations or a council's own conditions. This is not a planning decision: ask Vale of White Horse if in doubt.
Boundary: Vale of White Horse District Council via planning.data.gov.uk (entity 44004431, reference GFA, 60.7 ha). Homes are placed by the coordinates of their UPRN (OS Open UPRN); addresses are not shown.