EPC Price Check

Solar panels, heat pumps and insulation in Stanley conservation area

In the Stanley conservation area (Staffordshire Moorlands), external wall insulation needs planning permission, and so does an air source heat pump on a wall or roof facing the road; one at the back or side, internal and loft insulation and solar panels on a roof slope normally do not. 30 homes inside the boundary have an energy certificate: 37% are solid-wall homes with no wall insulation, 87% heat with a gas boiler and 83% are rated D–G; 0 have a heat pump. EPC register November 2026; rules as at 21 October 2026.

Data: EPC register November 2026 (latest certificate per home), conservation area boundaries 3 November 2026, permitted development rules as at 21 October 2026 · calculated 5 November 2026 · Methodology and sources

30homes with an energy certificate
37%solid walls, no insulation
87%heated by a gas boiler
0heat pumps

Article 4: Staffordshire Moorlands does not publish Article 4 areas on planning.data.gov.uk — check with the council.

What needs planning permission in Stanley

Work (house, not listed)In a conservation areaRule
Air source heat pump on a wall or roof facing the road, or nearer the road than the housePlanning permission neededPart 14 Class G, G.1(j)
Air source heat pump at the back or side (outdoor unit up to 1.5 m³, MCS Planning Standards, one per house — two on a detached house)No permission needed (permitted development), unless an Article 4 direction removes it — check with the councilPart 14 Class G
Solar panels on a pitched roof (up to 0.2 m proud, not above the ridge)No permission needed (permitted development), unless an Article 4 direction removes it — check with the councilPart 14 Class A, A.2(c)
Solar panels on a wall, balcony or roof enclosure facing the roadPlanning permission neededPart 14 Class A, A.2(e)
Solar panels on a flat roof (up to 0.6 m above the roof)Prior approval of appearance from the council, unless an Article 4 direction removes it — check with the councilPart 14 Class A, condition A(ba)
External wall insulation (render, cladding, timber, tiles)Planning permission neededPart 1 Class A, A.2(a)
Internal wall insulation, loft insulation, cavity wall insulationNot development: no planning permission—
Replacement windows and doors of similar appearanceNo permission needed (permitted development), unless an Article 4 direction removes it — check with the councilPart 1 Class A, A.3(a)

The homes in the area (latest certificate per home, n = 30)

WallsHomesShare
Solid wall (brick or stone), no insulation1137%
Cavity wall, insulated (as built or unspecified)517%
Cavity wall, unfilled517%
Modern wall (U-value from the design)27%
Solid wall, internal insulation27%
Cavity wall, filled13%
Cavity wall, internal or external insulation13%
Cavity wall, partly insulated13%
Solid wall, external insulation13%
Solid wall, insulated13%
HeatingHomesShare
Gas boiler2687%
Electric (storage heaters, panels, boiler)310%
Oil13%
Loft / roof insulationHomesShare
No insulation27%
Under 200 mm1240%
200 mm or more1240%
Insulated (depth not recorded)27%
Other27%
WindowsHomesShare
Double glazed2893%
Single glazed27%

Energy rating: B 1 (3%) · C 4 (13%) · D 18 (60%) · E 5 (17%) · F 2 (7%). Houses and bungalows: 100% of the homes; solar panels on 3% of the certificates. Most common build period on the certificates: before 1900. Designated: 25 November 1972.

Compared with Staffordshire Moorlands and England

Share of homesStanleyAll 17 areas in Staffordshire MoorlandsEngland
Solid walls, no insulation37%57.5%48.7%
Gas boiler87%73.4%66.4%
Rated D–G83%—56.5%

Caveats

All conservation areas in Staffordshire Moorlands · The rules for every conservation area

Guides: Heat pumps · Solar panels · External wall insulation · Replacement windows · Am I in a conservation area? Postcode checker