Solar panels, heat pumps and insulation in Melbourne conservation area
In the Melbourne conservation area (South Derbyshire), external wall insulation needs planning permission, and so does an air source heat pump on a wall or roof facing the road; one at the back or side, internal and loft insulation and solar panels on a roof slope normally do not. The area has 104 listed buildings; on a listed building solar panels and heat pumps are not permitted development at all and need planning permission and listed building consent. 477 homes inside the boundary have an energy certificate: 49.5% are solid-wall homes with no wall insulation, 82.8% heat with a gas boiler and 64.6% are rated D–G; 8 have a heat pump. EPC register November 2026; rules as at 21 October 2026.
Data: EPC register November 2026 (latest certificate per home), conservation area boundaries 3 November 2026, permitted development rules as at 21 October 2026 · calculated 5 November 2026 · Methodology and sources
477homes with an energy certificate
49.5%solid walls, no insulation
82.8%heated by a gas boiler
8heat pumps
Article 4: South Derbyshire does not publish Article 4 areas on planning.data.gov.uk — check with the council.
What needs planning permission in Melbourne
Work (house, not listed)
In a conservation area
Rule
Air source heat pump on a wall or roof facing the road, or nearer the road than the house
Planning permission needed
Part 14 Class G, G.1(j)
Air source heat pump at the back or side (outdoor unit up to 1.5 m³, MCS Planning Standards, one per house — two on a detached house)
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 14 Class G
Solar panels on a pitched roof (up to 0.2 m proud, not above the ridge)
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 14 Class A, A.2(c)
Solar panels on a wall, balcony or roof enclosure facing the road
Planning permission needed
Part 14 Class A, A.2(e)
Solar panels on a flat roof (up to 0.6 m above the roof)
Prior approval of appearance from the council, unless an Article 4 direction removes it — check with the council
Replacement windows and doors of similar appearance
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 1 Class A, A.3(a)
Listed buildings: 104 in the area (grade I: 24, II*: 7). The table is for houses that are not listed: on a listed building, solar panels and air source heat pumps are not permitted development at all (they need planning permission), and any of these works needs listed building consent.
Flats: 26% of the certified homes here are flats or maisonettes. Homes in a block of flats have no householder rights for alterations; heat pumps and solar have their own, tighter rules for blocks of flats.
The homes in the area (latest certificate per home, n = 477)
Walls
Homes
Share
Solid wall (brick or stone), no insulation
236
49.5%
Cavity wall, insulated (as built or unspecified)
94
19.7%
Cavity wall, filled
89
18.7%
Solid wall, internal insulation
17
3.6%
Modern wall (U-value from the design)
15
3.1%
Solid wall, insulated
12
2.5%
Cavity wall, partly insulated
6
1.3%
Cavity wall, unfilled
3
0.6%
Solid wall, partly insulated
3
0.6%
Solid wall, external insulation
1
0.2%
Timber frame
1
0.2%
Heating
Homes
Share
Gas boiler
395
82.8%
Electric (storage heaters, panels, boiler)
69
14.5%
Heat pump
8
1.7%
Solid fuel (wood, coal)
2
0.4%
Communal heating
1
0.2%
LPG
1
0.2%
Oil
1
0.2%
Loft / roof insulation
Homes
Share
No insulation
92
19.3%
Under 200 mm
119
24.9%
200 mm or more
149
31.2%
Insulated (depth not recorded)
48
10.1%
Flat or other home above
54
11.3%
Other
15
3.1%
Windows
Homes
Share
Double glazed
347
72.7%
Single glazed
108
22.6%
Secondary glazing
21
4.4%
Triple glazed
1
0.2%
CDE
Energy rating: B 6 (1.3%) · C 163 (34.2%) · D 192 (40.3%) · E 87 (18.2%) · F 25 (5.2%) · G 4 (0.8%). Houses and bungalows: 74% of the homes; solar panels on 0.2% of the certificates. Most common build period on the certificates: before 1900. Designated: 12 February 1969.
Compared with South Derbyshire and England
Share of homes
Melbourne
All 22 areas in South Derbyshire
England
Solid walls, no insulation
49.5%
49.3%
48.7%
Gas boiler
82.8%
77.1%
66.4%
Rated D–G
64.6%
—
56.5%
Caveats
Certificates describe a home when it was assessed; 54% of these are from 2020 or later (latest 8 October 2026). “No insulation (assumed)” is the assessor's default for older walls.
The rules are England's national permitted development rules (General Permitted Development Order 2015, Schedule 2, as at 21 October 2026). They do not cover building regulations or a council's own conditions. This is not a planning decision: ask South Derbyshire if in doubt.
Boundary: South Derbyshire District Council via planning.data.gov.uk (entity 44005062, reference 5707, 61.5 ha); the council's appraisal or map. Homes are placed by the coordinates of their UPRN (OS Open UPRN); addresses are not shown.