EPC Price Check

Solar panels, heat pumps and insulation in Lawn Crescent conservation area

In the Lawn Crescent conservation area (Richmond upon Thames), external wall insulation needs planning permission, and so does an air source heat pump on a wall or roof facing the road; one at the back or side, internal and loft insulation and solar panels on a roof slope normally do not. 34 homes inside the boundary have an energy certificate: 97% are solid-wall homes with no wall insulation, 97% heat with a gas boiler and 76% are rated D–G; 0 have a heat pump. EPC register November 2026; rules as at 21 October 2026.

Data: EPC register November 2026 (latest certificate per home), conservation area boundaries 3 November 2026, permitted development rules as at 21 October 2026 · calculated 5 November 2026 · Methodology and sources

34homes with an energy certificate
97%solid walls, no insulation
97%heated by a gas boiler
0heat pumps

Article 4: Richmond upon Thames does not publish Article 4 areas on planning.data.gov.uk — check with the council.

What needs planning permission in Lawn Crescent

Work (house, not listed)In a conservation areaRule
Air source heat pump on a wall or roof facing the road, or nearer the road than the housePlanning permission neededPart 14 Class G, G.1(j)
Air source heat pump at the back or side (outdoor unit up to 1.5 m³, MCS Planning Standards, one per house — two on a detached house)No permission needed (permitted development), unless an Article 4 direction removes it — check with the councilPart 14 Class G
Solar panels on a pitched roof (up to 0.2 m proud, not above the ridge)No permission needed (permitted development), unless an Article 4 direction removes it — check with the councilPart 14 Class A, A.2(c)
Solar panels on a wall, balcony or roof enclosure facing the roadPlanning permission neededPart 14 Class A, A.2(e)
Solar panels on a flat roof (up to 0.6 m above the roof)Prior approval of appearance from the council, unless an Article 4 direction removes it — check with the councilPart 14 Class A, condition A(ba)
External wall insulation (render, cladding, timber, tiles)Planning permission neededPart 1 Class A, A.2(a)
Internal wall insulation, loft insulation, cavity wall insulationNot development: no planning permission—
Replacement windows and doors of similar appearanceNo permission needed (permitted development), unless an Article 4 direction removes it — check with the councilPart 1 Class A, A.3(a)

The homes in the area (latest certificate per home, n = 34)

WallsHomesShare
Solid wall (brick or stone), no insulation3397%
Timber frame13%
HeatingHomesShare
Gas boiler3397%
Communal heating13%
Loft / roof insulationHomesShare
No insulation1956%
Under 200 mm39%
200 mm or more412%
Insulated (depth not recorded)412%
Flat or other home above412%
WindowsHomesShare
Double glazed2985%
Single glazed412%
Secondary glazing13%

Energy rating: C 8 (24%) · D 14 (41%) · E 10 (29%) · F 2 (6%). Houses and bungalows: 65% of the homes; solar panels on 0% of the certificates. Most common build period on the certificates: before 1900. Designated: 17 September 1974.

Compared with Richmond upon Thames and England

Share of homesLawn CrescentAll 85 areas in Richmond upon ThamesEngland
Solid walls, no insulation97%63.5%48.7%
Gas boiler97%83.6%66.4%
Rated D–G76%—56.5%

Caveats

All conservation areas in Richmond upon Thames · The rules for every conservation area

Guides: Heat pumps · Solar panels · External wall insulation · Replacement windows · Am I in a conservation area? Postcode checker