Solar panels, heat pumps and insulation in Bracondale conservation area
In the Bracondale conservation area (Norwich), external wall insulation needs planning permission, and so does an air source heat pump on a wall or roof facing the road; one at the back or side, internal and loft insulation and solar panels on a roof slope normally do not. The area has 38 listed buildings; on a listed building solar panels and heat pumps are not permitted development at all and need planning permission and listed building consent. 415 homes inside the boundary have an energy certificate: 25.3% are solid-wall homes with no wall insulation, 52.8% heat with a gas boiler and 34.9% are rated D–G; 0 have a heat pump. EPC register November 2026; rules as at 21 October 2026.
Data: EPC register November 2026 (latest certificate per home), conservation area boundaries 3 November 2026, permitted development rules as at 21 October 2026 · calculated 5 November 2026 · Methodology and sources
415homes with an energy certificate
25.3%solid walls, no insulation
52.8%heated by a gas boiler
0heat pumps
Article 4: Norwich does not publish Article 4 areas on planning.data.gov.uk — check with the council.
What needs planning permission in Bracondale
Work (house, not listed)
In a conservation area
Rule
Air source heat pump on a wall or roof facing the road, or nearer the road than the house
Planning permission needed
Part 14 Class G, G.1(j)
Air source heat pump at the back or side (outdoor unit up to 1.5 m³, MCS Planning Standards, one per house — two on a detached house)
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 14 Class G
Solar panels on a pitched roof (up to 0.2 m proud, not above the ridge)
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 14 Class A, A.2(c)
Solar panels on a wall, balcony or roof enclosure facing the road
Planning permission needed
Part 14 Class A, A.2(e)
Solar panels on a flat roof (up to 0.6 m above the roof)
Prior approval of appearance from the council, unless an Article 4 direction removes it — check with the council
Replacement windows and doors of similar appearance
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 1 Class A, A.3(a)
Listed buildings: 38 in the area (grade I: 1, II*: 3). The table is for houses that are not listed: on a listed building, solar panels and air source heat pumps are not permitted development at all (they need planning permission), and any of these works needs listed building consent.
Flats: 67% of the certified homes here are flats or maisonettes. Homes in a block of flats have no householder rights for alterations; heat pumps and solar have their own, tighter rules for blocks of flats.
The homes in the area (latest certificate per home, n = 415)
Walls
Homes
Share
Solid wall (brick or stone), no insulation
105
25.3%
Cavity wall, insulated (as built or unspecified)
98
23.6%
Other or not known
63
15.2%
Cavity wall, filled
54
13.0%
Cavity wall, unfilled
37
8.9%
Solid wall, insulated
22
5.3%
Cavity wall, partly insulated
17
4.1%
Solid wall, internal insulation
12
2.9%
Cavity wall, internal or external insulation
2
0.5%
Modern wall (U-value from the design)
2
0.5%
Solid wall, partly insulated
2
0.5%
Timber frame
1
0.2%
Heating
Homes
Share
Gas boiler
219
52.8%
Electric (storage heaters, panels, boiler)
176
42.4%
Communal heating
16
3.9%
Solid fuel (wood, coal)
3
0.7%
LPG
1
0.2%
Loft / roof insulation
Homes
Share
No insulation
23
5.5%
Under 200 mm
42
10.1%
200 mm or more
110
26.5%
Insulated (depth not recorded)
53
12.8%
Flat or other home above
185
44.6%
Other
2
0.5%
Windows
Homes
Share
Double glazed
374
90.1%
Secondary glazing
22
5.3%
Single glazed
19
4.6%
BCD
Energy rating: B 53 (12.8%) · C 217 (52.3%) · D 104 (25.1%) · E 32 (7.7%) · F 7 (1.7%) · G 2 (0.5%). Houses and bungalows: 33% of the homes; solar panels on 0.0% of the certificates. Most common build period on the certificates: before 1900. Designated: 3 February 1970.
Compared with Norwich and England
Share of homes
Bracondale
All 17 areas in Norwich
England
Solid walls, no insulation
25.3%
28.4%
48.7%
Gas boiler
52.8%
64.3%
66.4%
Rated D–G
34.9%
—
56.5%
Caveats
Certificates describe a home when it was assessed; 56% of these are from 2020 or later (latest 6 October 2026). “No insulation (assumed)” is the assessor's default for older walls.
The rules are England's national permitted development rules (General Permitted Development Order 2015, Schedule 2, as at 21 October 2026). They do not cover building regulations or a council's own conditions. This is not a planning decision: ask Norwich if in doubt.
Boundary: Norwich City Council via planning.data.gov.uk (entity 44014291, reference 2, 23.7 ha); the council's appraisal or map. Homes are placed by the coordinates of their UPRN (OS Open UPRN); addresses are not shown.