EPC Price Check

Solar panels, heat pumps and insulation in Egton conservation area

In the Egton conservation area (North York Moors National Park Authority), external wall insulation needs planning permission, and so does an air source heat pump on a wall or roof facing the road; one at the back or side, internal and loft insulation and solar panels on a roof slope normally do not. The area has 17 listed buildings; on a listed building solar panels and heat pumps are not permitted development at all and need planning permission and listed building consent. 45 homes inside the boundary have an energy certificate: 69% are solid-wall homes with no wall insulation, 0% heat with a gas boiler and 98% are rated D–G; 2 have a heat pump. EPC register November 2026; rules as at 21 October 2026.

Data: EPC register November 2026 (latest certificate per home), conservation area boundaries 3 November 2026, permitted development rules as at 21 October 2026 · calculated 5 November 2026 · Methodology and sources

45homes with an energy certificate
69%solid walls, no insulation
0%heated by a gas boiler
2heat pumps

Article 4: North York Moors National Park Authority does not publish Article 4 areas on planning.data.gov.uk — check with the council.

What needs planning permission in Egton

Work (house, not listed)In a conservation areaRule
Air source heat pump on a wall or roof facing the road, or nearer the road than the housePlanning permission neededPart 14 Class G, G.1(j)
Air source heat pump at the back or side (outdoor unit up to 1.5 m³, MCS Planning Standards, one per house — two on a detached house)No permission needed (permitted development), unless an Article 4 direction removes it — check with the councilPart 14 Class G
Solar panels on a pitched roof (up to 0.2 m proud, not above the ridge)No permission needed (permitted development), unless an Article 4 direction removes it — check with the councilPart 14 Class A, A.2(c)
Solar panels on a wall, balcony or roof enclosure facing the roadPlanning permission neededPart 14 Class A, A.2(e)
Solar panels on a flat roof (up to 0.6 m above the roof)Prior approval of appearance from the council, unless an Article 4 direction removes it — check with the councilPart 14 Class A, condition A(ba)
External wall insulation (render, cladding, timber, tiles)Planning permission neededPart 1 Class A, A.2(a)
Internal wall insulation, loft insulation, cavity wall insulationNot development: no planning permission—
Replacement windows and doors of similar appearanceNo permission needed (permitted development), unless an Article 4 direction removes it — check with the councilPart 1 Class A, A.3(a)

The homes in the area (latest certificate per home, n = 45)

WallsHomesShare
Solid wall (brick or stone), no insulation3169%
Solid wall, internal insulation49%
Cavity wall, insulated (as built or unspecified)37%
Cavity wall, filled24%
Solid wall, insulated24%
Cavity wall, unfilled12%
Modern wall (U-value from the design)12%
Timber frame12%
HeatingHomesShare
Oil2147%
Electric (storage heaters, panels, boiler)1329%
Solid fuel (wood, coal)613%
Heat pump24%
LPG24%
Communal heating12%
Loft / roof insulationHomesShare
No insulation1227%
Under 200 mm1124%
200 mm or more1227%
Insulated (depth not recorded)920%
Other12%
WindowsHomesShare
Double glazed3578%
Single glazed920%
Secondary glazing12%

Energy rating: C 1 (2%) · D 12 (27%) · E 15 (33%) · F 7 (16%) · G 10 (22%). Houses and bungalows: 100% of the homes; solar panels on 2% of the certificates. Most common build period on the certificates: before 1900. Designated: 10 November 1993.

Compared with North York Moors National Park Authority and England

Share of homesEgtonAll 40 areas in North York Moors National Park AuthorityEngland
Solid walls, no insulation69%65.7%48.7%
Gas boiler0%36.0%66.4%
Rated D–G98%—56.5%

Caveats

All conservation areas in North York Moors National Park Authority · The rules for every conservation area

Guides: Heat pumps · Solar panels · External wall insulation · Replacement windows · Am I in a conservation area? Postcode checker