Solar panels, heat pumps and insulation in New Romney, High Street conservation area
In the New Romney, High Street conservation area (Folkestone and Hythe), external wall insulation needs planning permission, and so does an air source heat pump on a wall or roof facing the road; one at the back or side, internal and loft insulation and solar panels on a roof slope normally do not. The area has 49 listed buildings; on a listed building solar panels and heat pumps are not permitted development at all and need planning permission and listed building consent. 137 homes inside the boundary have an energy certificate: 33.6% are solid-wall homes with no wall insulation, 78.8% heat with a gas boiler and 69.3% are rated D–G; 3 have a heat pump. EPC register November 2026; rules as at 21 October 2026.
Data: EPC register November 2026 (latest certificate per home), conservation area boundaries 3 November 2026, permitted development rules as at 21 October 2026 · calculated 5 November 2026 · Methodology and sources
137homes with an energy certificate
33.6%solid walls, no insulation
78.8%heated by a gas boiler
3heat pumps
Article 4: Folkestone and Hythe does not publish Article 4 areas on planning.data.gov.uk — check with the council.
What needs planning permission in New Romney, High Street
Work (house, not listed)
In a conservation area
Rule
Air source heat pump on a wall or roof facing the road, or nearer the road than the house
Planning permission needed
Part 14 Class G, G.1(j)
Air source heat pump at the back or side (outdoor unit up to 1.5 m³, MCS Planning Standards, one per house — two on a detached house)
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 14 Class G
Solar panels on a pitched roof (up to 0.2 m proud, not above the ridge)
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 14 Class A, A.2(c)
Solar panels on a wall, balcony or roof enclosure facing the road
Planning permission needed
Part 14 Class A, A.2(e)
Solar panels on a flat roof (up to 0.6 m above the roof)
Prior approval of appearance from the council, unless an Article 4 direction removes it — check with the council
Replacement windows and doors of similar appearance
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 1 Class A, A.3(a)
Listed buildings: 49 in the area (grade I: 1, II*: 2). The table is for houses that are not listed: on a listed building, solar panels and air source heat pumps are not permitted development at all (they need planning permission), and any of these works needs listed building consent.
Flats: 33% of the certified homes here are flats or maisonettes. Homes in a block of flats have no householder rights for alterations; heat pumps and solar have their own, tighter rules for blocks of flats.
The homes in the area (latest certificate per home, n = 137)
Walls
Homes
Share
Solid wall (brick or stone), no insulation
46
33.6%
Cavity wall, unfilled
23
16.8%
Modern wall (U-value from the design)
20
14.6%
Cavity wall, insulated (as built or unspecified)
17
12.4%
Cavity wall, filled
10
7.3%
Cavity wall, partly insulated
9
6.6%
Solid wall, internal insulation
5
3.6%
Timber frame
3
2.2%
Cavity wall, internal or external insulation
2
1.5%
Solid wall, insulated
2
1.5%
Heating
Homes
Share
Gas boiler
108
78.8%
Electric (storage heaters, panels, boiler)
22
16.1%
Communal heating
4
2.9%
Heat pump
3
2.2%
Loft / roof insulation
Homes
Share
No insulation
17
12.4%
Under 200 mm
37
27.0%
200 mm or more
42
30.7%
Insulated (depth not recorded)
16
11.7%
Flat or other home above
7
5.1%
Other
18
13.1%
Windows
Homes
Share
Double glazed
106
77.4%
Single glazed
18
13.1%
Secondary glazing
12
8.8%
Triple glazed
1
0.7%
BCDE
Energy rating: B 16 (11.7%) · C 26 (19.0%) · D 56 (40.9%) · E 31 (22.6%) · F 5 (3.6%) · G 3 (2.2%). Houses and bungalows: 67% of the homes; solar panels on 1.5% of the certificates. Most common build period on the certificates: before 1900. Designated: 5 February 1971.
Compared with Folkestone and Hythe and England
Share of homes
New Romney, High Street
All 21 areas in Folkestone and Hythe
England
Solid walls, no insulation
33.6%
40.8%
48.7%
Gas boiler
78.8%
69.0%
66.4%
Rated D–G
69.3%
—
56.5%
Caveats
Certificates describe a home when it was assessed; 50% of these are from 2020 or later (latest 3 June 2026). “No insulation (assumed)” is the assessor's default for older walls.
The rules are England's national permitted development rules (General Permitted Development Order 2015, Schedule 2, as at 21 October 2026). They do not cover building regulations or a council's own conditions. This is not a planning decision: ask Folkestone and Hythe if in doubt.
Boundary: Folkestone and Hythe Council via planning.data.gov.uk (entity 44007326, reference 5791, 11.0 ha); the council's appraisal or map. Homes are placed by the coordinates of their UPRN (OS Open UPRN); addresses are not shown.