Solar panels, heat pumps and insulation in Beverley Markets Area conservation area
In the Beverley Markets Area conservation area (East Riding of Yorkshire), external wall insulation needs planning permission, and so does an air source heat pump on a wall or roof facing the road; one at the back or side, internal and loft insulation and solar panels on a roof slope normally do not. The area has 130 listed buildings; on a listed building solar panels and heat pumps are not permitted development at all and need planning permission and listed building consent. 194 homes inside the boundary have an energy certificate: 30.9% are solid-wall homes with no wall insulation, 80.9% heat with a gas boiler and 47.9% are rated D–G; 0 have a heat pump. EPC register November 2026; rules as at 21 October 2026.
Data: EPC register November 2026 (latest certificate per home), conservation area boundaries 3 November 2026, permitted development rules as at 21 October 2026 · calculated 5 November 2026 · Methodology and sources
194homes with an energy certificate
30.9%solid walls, no insulation
80.9%heated by a gas boiler
0heat pumps
Article 4: East Riding of Yorkshire publishes its Article 4 areas on planning.data.gov.uk and none overlaps this area; a direction can still exist on paper, so check with the council.
What needs planning permission in Beverley Markets Area
Work (house, not listed)
In a conservation area
Rule
Air source heat pump on a wall or roof facing the road, or nearer the road than the house
Planning permission needed
Part 14 Class G, G.1(j)
Air source heat pump at the back or side (outdoor unit up to 1.5 m³, MCS Planning Standards, one per house — two on a detached house)
No permission needed (permitted development)
Part 14 Class G
Solar panels on a pitched roof (up to 0.2 m proud, not above the ridge)
No permission needed (permitted development)
Part 14 Class A, A.2(c)
Solar panels on a wall, balcony or roof enclosure facing the road
Planning permission needed
Part 14 Class A, A.2(e)
Solar panels on a flat roof (up to 0.6 m above the roof)
Replacement windows and doors of similar appearance
No permission needed (permitted development)
Part 1 Class A, A.3(a)
Listed buildings: 130 in the area (grade I: 1, II*: 8). The table is for houses that are not listed: on a listed building, solar panels and air source heat pumps are not permitted development at all (they need planning permission), and any of these works needs listed building consent.
Flats: 40% of the certified homes here are flats or maisonettes. Homes in a block of flats have no householder rights for alterations; heat pumps and solar have their own, tighter rules for blocks of flats.
The homes in the area (latest certificate per home, n = 194)
Walls
Homes
Share
Cavity wall, insulated (as built or unspecified)
83
42.8%
Solid wall (brick or stone), no insulation
60
30.9%
Modern wall (U-value from the design)
18
9.3%
Cavity wall, filled
9
4.6%
Cavity wall, partly insulated
8
4.1%
Timber frame
6
3.1%
Solid wall, internal insulation
5
2.6%
Cavity wall, unfilled
3
1.5%
Other or not known
1
0.5%
Solid wall, insulated
1
0.5%
Heating
Homes
Share
Gas boiler
157
80.9%
Electric (storage heaters, panels, boiler)
36
18.6%
Communal heating
1
0.5%
Loft / roof insulation
Homes
Share
No insulation
11
5.7%
Under 200 mm
43
22.2%
200 mm or more
69
35.6%
Insulated (depth not recorded)
25
12.9%
Flat or other home above
30
15.5%
Other
16
8.2%
Windows
Homes
Share
Double glazed
171
88.1%
Single glazed
17
8.8%
Secondary glazing
6
3.1%
CDE
Energy rating: B 3 (1.5%) · C 98 (50.5%) · D 61 (31.4%) · E 26 (13.4%) · F 5 (2.6%) · G 1 (0.5%). Houses and bungalows: 60% of the homes; solar panels on 0.0% of the certificates. Most common build period on the certificates: before 1900. Designated: 2 April 2013.
Compared with East Riding of Yorkshire and England
Share of homes
Beverley Markets Area
All 126 areas in East Riding of Yorkshire
England
Solid walls, no insulation
30.9%
42.4%
48.7%
Gas boiler
80.9%
68.6%
66.4%
Rated D–G
47.9%
—
56.5%
Caveats
Certificates describe a home when it was assessed; 54% of these are from 2020 or later (latest 19 August 2026). “No insulation (assumed)” is the assessor's default for older walls.
The rules are England's national permitted development rules (General Permitted Development Order 2015, Schedule 2, as at 21 October 2026). They do not cover building regulations or a council's own conditions. This is not a planning decision: ask East Riding of Yorkshire if in doubt.
Boundary: East Riding of Yorkshire Council via planning.data.gov.uk (entity 44015512, reference ca15, 12.0 ha); the council's appraisal or map. Homes are placed by the coordinates of their UPRN (OS Open UPRN); addresses are not shown.