EPC Price Check

Solar panels, heat pumps and insulation in Lydford conservation area

In the Lydford conservation area (Dartmoor National Park Authority), external wall insulation needs planning permission, and so does an air source heat pump on a wall or roof facing the road; one at the back or side, internal and loft insulation and solar panels on a roof slope normally do not. The area has 18 listed buildings; on a listed building solar panels and heat pumps are not permitted development at all and need planning permission and listed building consent. 60 homes inside the boundary have an energy certificate: 37% are solid-wall homes with no wall insulation, 0% heat with a gas boiler and 92% are rated D–G; 5 have a heat pump. EPC register November 2026; rules as at 21 October 2026.

Data: EPC register November 2026 (latest certificate per home), conservation area boundaries 3 November 2026, permitted development rules as at 21 October 2026 · calculated 5 November 2026 · Methodology and sources

60homes with an energy certificate
37%solid walls, no insulation
0%heated by a gas boiler
5heat pumps

Article 4: Dartmoor National Park Authority does not publish Article 4 areas on planning.data.gov.uk — check with the council.

What needs planning permission in Lydford

Work (house, not listed)In a conservation areaRule
Air source heat pump on a wall or roof facing the road, or nearer the road than the housePlanning permission neededPart 14 Class G, G.1(j)
Air source heat pump at the back or side (outdoor unit up to 1.5 m³, MCS Planning Standards, one per house — two on a detached house)No permission needed (permitted development), unless an Article 4 direction removes it — check with the councilPart 14 Class G
Solar panels on a pitched roof (up to 0.2 m proud, not above the ridge)No permission needed (permitted development), unless an Article 4 direction removes it — check with the councilPart 14 Class A, A.2(c)
Solar panels on a wall, balcony or roof enclosure facing the roadPlanning permission neededPart 14 Class A, A.2(e)
Solar panels on a flat roof (up to 0.6 m above the roof)Prior approval of appearance from the council, unless an Article 4 direction removes it — check with the councilPart 14 Class A, condition A(ba)
External wall insulation (render, cladding, timber, tiles)Planning permission neededPart 1 Class A, A.2(a)
Internal wall insulation, loft insulation, cavity wall insulationNot development: no planning permission—
Replacement windows and doors of similar appearanceNo permission needed (permitted development), unless an Article 4 direction removes it — check with the councilPart 1 Class A, A.3(a)

The homes in the area (latest certificate per home, n = 60)

WallsHomesShare
Solid wall (brick or stone), no insulation2237%
Cavity wall, filled1322%
Cavity wall, unfilled1017%
Cavity wall, insulated (as built or unspecified)58%
Cavity wall, partly insulated35%
Solid wall, insulated35%
Solid wall, internal insulation23%
Solid wall, external insulation12%
Timber frame12%
HeatingHomesShare
Oil3253%
Electric (storage heaters, panels, boiler)1322%
LPG712%
Heat pump58%
Solid fuel (wood, coal)23%
Communal heating12%
Loft / roof insulationHomesShare
No insulation47%
Under 200 mm1423%
200 mm or more3355%
Insulated (depth not recorded)813%
Flat or other home above12%
WindowsHomesShare
Double glazed5998%
Single glazed12%

Energy rating: B 2 (3%) · C 3 (5%) · D 17 (28%) · E 25 (42%) · F 8 (13%) · G 5 (8%). Houses and bungalows: 97% of the homes; solar panels on 3% of the certificates. Most common build period on the certificates: before 1900. Designated: 22 October 1971.

Compared with Dartmoor National Park Authority and England

Share of homesLydfordAll 25 areas in Dartmoor National Park AuthorityEngland
Solid walls, no insulation37%63.1%48.7%
Gas boiler0%55.4%66.4%
Rated D–G92%—56.5%

Caveats

All conservation areas in Dartmoor National Park Authority · The rules for every conservation area

Guides: Heat pumps · Solar panels · External wall insulation · Replacement windows · Am I in a conservation area? Postcode checker