Solar panels, heat pumps and insulation in Biggleswade conservation area
In the Biggleswade conservation area (Central Bedfordshire), external wall insulation needs planning permission, and so does an air source heat pump on a wall or roof facing the road; one at the back or side, internal and loft insulation and solar panels on a roof slope normally do not. The area has 43 listed buildings; on a listed building solar panels and heat pumps are not permitted development at all and need planning permission and listed building consent. 527 homes inside the boundary have an energy certificate: 27.5% are solid-wall homes with no wall insulation, 70.4% heat with a gas boiler and 39.3% are rated D–G; 2 have a heat pump. EPC register November 2026; rules as at 21 October 2026.
Data: EPC register November 2026 (latest certificate per home), conservation area boundaries 3 November 2026, permitted development rules as at 21 October 2026 · calculated 5 November 2026 · Methodology and sources
527homes with an energy certificate
27.5%solid walls, no insulation
70.4%heated by a gas boiler
2heat pumps
Article 4: Central Bedfordshire publishes its Article 4 areas on planning.data.gov.uk and none overlaps this area; a direction can still exist on paper, so check with the council.
What needs planning permission in Biggleswade
Work (house, not listed)
In a conservation area
Rule
Air source heat pump on a wall or roof facing the road, or nearer the road than the house
Planning permission needed
Part 14 Class G, G.1(j)
Air source heat pump at the back or side (outdoor unit up to 1.5 m³, MCS Planning Standards, one per house — two on a detached house)
No permission needed (permitted development)
Part 14 Class G
Solar panels on a pitched roof (up to 0.2 m proud, not above the ridge)
No permission needed (permitted development)
Part 14 Class A, A.2(c)
Solar panels on a wall, balcony or roof enclosure facing the road
Planning permission needed
Part 14 Class A, A.2(e)
Solar panels on a flat roof (up to 0.6 m above the roof)
Replacement windows and doors of similar appearance
No permission needed (permitted development)
Part 1 Class A, A.3(a)
Listed buildings: 43 in the area (grade I: 0, II*: 1). The table is for houses that are not listed: on a listed building, solar panels and air source heat pumps are not permitted development at all (they need planning permission), and any of these works needs listed building consent.
Flats: 60% of the certified homes here are flats or maisonettes. Homes in a block of flats have no householder rights for alterations; heat pumps and solar have their own, tighter rules for blocks of flats.
The homes in the area (latest certificate per home, n = 527)
Walls
Homes
Share
Solid wall (brick or stone), no insulation
145
27.5%
Cavity wall, insulated (as built or unspecified)
125
23.7%
Modern wall (U-value from the design)
104
19.7%
Cavity wall, filled
56
10.6%
Timber frame
30
5.7%
Solid wall, insulated
22
4.2%
Solid wall, internal insulation
14
2.7%
Other or not known
11
2.1%
Cavity wall, unfilled
9
1.7%
Cavity wall, partly insulated
7
1.3%
Solid wall, external insulation
2
0.4%
Solid wall, partly insulated
2
0.4%
Heating
Homes
Share
Gas boiler
371
70.4%
Electric (storage heaters, panels, boiler)
123
23.3%
Communal heating
29
5.5%
Heat pump
2
0.4%
Oil
1
0.2%
Solid fuel (wood, coal)
1
0.2%
Loft / roof insulation
Homes
Share
No insulation
34
6.5%
Under 200 mm
89
16.9%
200 mm or more
96
18.3%
Insulated (depth not recorded)
99
18.8%
Flat or other home above
130
24.7%
Other
78
14.8%
Windows
Homes
Share
Double glazed
457
86.7%
Single glazed
53
10.1%
Secondary glazing
17
3.2%
BCDE
Energy rating: A 2 (0.4%) · B 104 (19.7%) · C 214 (40.6%) · D 137 (26.0%) · E 53 (10.1%) · F 12 (2.3%) · G 5 (0.9%). Houses and bungalows: 40% of the homes; solar panels on 0.0% of the certificates. Most common build period on the certificates: before 1900.
Compared with Central Bedfordshire and England
Share of homes
Biggleswade
All 61 areas in Central Bedfordshire
England
Solid walls, no insulation
27.5%
42.5%
48.7%
Gas boiler
70.4%
66.4%
66.4%
Rated D–G
39.3%
—
56.5%
Caveats
Certificates describe a home when it was assessed; 58% of these are from 2020 or later (latest 10 October 2026). “No insulation (assumed)” is the assessor's default for older walls.
The rules are England's national permitted development rules (General Permitted Development Order 2015, Schedule 2, as at 21 October 2026). They do not cover building regulations or a council's own conditions. This is not a planning decision: ask Central Bedfordshire if in doubt.
Boundary: Central Bedfordshire Council via planning.data.gov.uk (entity 44013542, reference CA05, 22.3 ha). Homes are placed by the coordinates of their UPRN (OS Open UPRN); addresses are not shown.