Solar panels, heat pumps and insulation in Ickham-Wickhambreaux-Seaton conservation area
In the Ickham-Wickhambreaux-Seaton conservation area (Canterbury), external wall insulation needs planning permission, and so does an air source heat pump on a wall or roof facing the road; one at the back or side, internal and loft insulation and solar panels on a roof slope normally do not. An Article 4 direction published by Canterbury covers part of this area (about 1% of it), but the published data does not say which rights it removes — check the direction before any work. The area has 54 listed buildings; on a listed building solar panels and heat pumps are not permitted development at all and need planning permission and listed building consent. 167 homes inside the boundary have an energy certificate: 38.3% are solid-wall homes with no wall insulation, 89.2% heat with a gas boiler and 69.5% are rated D–G; 0 have a heat pump. EPC register November 2026; rules as at 21 October 2026.
Data: EPC register November 2026 (latest certificate per home), conservation area boundaries 3 November 2026, permitted development rules as at 21 October 2026 · calculated 5 November 2026 · Methodology and sources
167homes with an energy certificate
38.3%solid walls, no insulation
89.2%heated by a gas boiler
0heat pumps
Article 4: An Article 4 direction published by Canterbury covers part of this area (about 1% of it), but the published data does not say which rights it removes — check the direction before any work. (1 OAST COTTAGES, THE STREET, ICKHAM; 1 SCHOOL COTTAGES, THE STREET, WICKHAMBREAUX; 1 SEATON ROAD COTTAGES, SEATON ROAD, WICKHAMBREAUX; 1,2,3,4,5, AND 6 THE STREET, WICKHAMBREAUX; 2 OAST COTTAGES, THE STREET, ICKHAM; 2 SCHOOL COTTAGES, THE STREET, WICKHAMBREAUX)
What needs planning permission in Ickham-Wickhambreaux-Seaton
Work (house, not listed)
In a conservation area
Rule
Air source heat pump on a wall or roof facing the road, or nearer the road than the house
Planning permission needed
Part 14 Class G, G.1(j)
Air source heat pump at the back or side (outdoor unit up to 1.5 m³, MCS Planning Standards, one per house — two on a detached house)
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 14 Class G
Solar panels on a pitched roof (up to 0.2 m proud, not above the ridge)
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 14 Class A, A.2(c)
Solar panels on a wall, balcony or roof enclosure facing the road
Planning permission needed
Part 14 Class A, A.2(e)
Solar panels on a flat roof (up to 0.6 m above the roof)
Prior approval of appearance from the council, unless an Article 4 direction removes it — check with the council
Replacement windows and doors of similar appearance
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 1 Class A, A.3(a)
Listed buildings: 54 in the area (grade I: 2, II*: 4). The table is for houses that are not listed: on a listed building, solar panels and air source heat pumps are not permitted development at all (they need planning permission), and any of these works needs listed building consent.
Flats: 14% of the certified homes here are flats or maisonettes. Homes in a block of flats have no householder rights for alterations; heat pumps and solar have their own, tighter rules for blocks of flats.
The homes in the area (latest certificate per home, n = 167)
Walls
Homes
Share
Solid wall (brick or stone), no insulation
64
38.3%
Cavity wall, filled
37
22.2%
Cavity wall, unfilled
23
13.8%
Timber frame
16
9.6%
Cavity wall, insulated (as built or unspecified)
13
7.8%
Solid wall, insulated
9
5.4%
Solid wall, internal insulation
4
2.4%
Cavity wall, partly insulated
1
0.6%
Heating
Homes
Share
Gas boiler
149
89.2%
Electric (storage heaters, panels, boiler)
8
4.8%
Oil
8
4.8%
Communal heating
2
1.2%
Loft / roof insulation
Homes
Share
No insulation
29
17.4%
Under 200 mm
47
28.1%
200 mm or more
40
24.0%
Insulated (depth not recorded)
37
22.2%
Flat or other home above
12
7.2%
Other
2
1.2%
Windows
Homes
Share
Double glazed
113
67.7%
Single glazed
43
25.7%
Secondary glazing
11
6.6%
CDE
Energy rating: B 2 (1.2%) · C 49 (29.3%) · D 81 (48.5%) · E 24 (14.4%) · F 8 (4.8%) · G 3 (1.8%). Houses and bungalows: 86% of the homes; solar panels on 0.0% of the certificates. Most common build period on the certificates: before 1900. Designated: 29 August 1969.
Compared with Canterbury and England
Share of homes
Ickham-Wickhambreaux-Seaton
All 98 areas in Canterbury
England
Solid walls, no insulation
38.3%
36.5%
48.7%
Gas boiler
89.2%
73.7%
66.4%
Rated D–G
69.5%
—
56.5%
Caveats
Certificates describe a home when it was assessed; 52% of these are from 2020 or later (latest 21 October 2026). “No insulation (assumed)” is the assessor's default for older walls.
The rules are England's national permitted development rules (General Permitted Development Order 2015, Schedule 2, as at 21 October 2026). They do not cover building regulations or a council's own conditions. This is not a planning decision: ask Canterbury if in doubt.
Boundary: Canterbury City Council via planning.data.gov.uk (entity 44008324, reference 164, 140.5 ha); the council's appraisal or map. Homes are placed by the coordinates of their UPRN (OS Open UPRN); addresses are not shown.