EPC Price Check

Solar panels, heat pumps and insulation in Brunstead Road conservation area

In the Brunstead Road conservation area (Bournemouth, Christchurch and Poole), external wall insulation needs planning permission, and so does an air source heat pump on a wall or roof facing the road; one at the back or side, internal and loft insulation and solar panels on a roof slope normally do not. 60 homes inside the boundary have an energy certificate: 0% are solid-wall homes with no wall insulation, 95% heat with a gas boiler and 65% are rated D–G; 0 have a heat pump. EPC register November 2026; rules as at 21 October 2026.

Data: EPC register November 2026 (latest certificate per home), conservation area boundaries 3 November 2026, permitted development rules as at 21 October 2026 · calculated 5 November 2026 · Methodology and sources

60homes with an energy certificate
0%solid walls, no insulation
95%heated by a gas boiler
0heat pumps

Article 4: Bournemouth, Christchurch and Poole does not publish Article 4 areas on planning.data.gov.uk — check with the council.

What needs planning permission in Brunstead Road

Work (house, not listed)In a conservation areaRule
Air source heat pump on a wall or roof facing the road, or nearer the road than the housePlanning permission neededPart 14 Class G, G.1(j)
Air source heat pump at the back or side (outdoor unit up to 1.5 m³, MCS Planning Standards, one per house — two on a detached house)No permission needed (permitted development), unless an Article 4 direction removes it — check with the councilPart 14 Class G
Solar panels on a pitched roof (up to 0.2 m proud, not above the ridge)No permission needed (permitted development), unless an Article 4 direction removes it — check with the councilPart 14 Class A, A.2(c)
Solar panels on a wall, balcony or roof enclosure facing the roadPlanning permission neededPart 14 Class A, A.2(e)
Solar panels on a flat roof (up to 0.6 m above the roof)Prior approval of appearance from the council, unless an Article 4 direction removes it — check with the councilPart 14 Class A, condition A(ba)
External wall insulation (render, cladding, timber, tiles)Planning permission neededPart 1 Class A, A.2(a)
Internal wall insulation, loft insulation, cavity wall insulationNot development: no planning permission—
Replacement windows and doors of similar appearanceNo permission needed (permitted development), unless an Article 4 direction removes it — check with the councilPart 1 Class A, A.3(a)

The homes in the area (latest certificate per home, n = 60)

WallsHomesShare
Cavity wall, unfilled3355%
Cavity wall, filled1423%
Modern wall (U-value from the design)610%
Timber frame47%
Cavity wall, insulated (as built or unspecified)35%
HeatingHomesShare
Gas boiler5795%
Electric (storage heaters, panels, boiler)23%
Communal heating12%
Loft / roof insulationHomesShare
No insulation712%
Under 200 mm1423%
200 mm or more813%
Insulated (depth not recorded)915%
Flat or other home above1830%
Other47%
WindowsHomesShare
Double glazed4575%
Single glazed1322%
Secondary glazing23%

Energy rating: C 21 (35%) · D 26 (43%) · E 12 (20%) · G 1 (2%). Houses and bungalows: 45% of the homes; solar panels on 0% of the certificates. Most common build period on the certificates: 1900-1929. Designated: 1 July 1989.

Compared with Bournemouth, Christchurch and Poole and England

Share of homesBrunstead RoadAll 47 areas in Bournemouth, Christchurch and PooleEngland
Solid walls, no insulation0%6.4%48.7%
Gas boiler95%63.6%66.4%
Rated D–G65%—56.5%

Caveats

All conservation areas in Bournemouth, Christchurch and Poole · The rules for every conservation area

Guides: Heat pumps · Solar panels · External wall insulation · Replacement windows · Am I in a conservation area? Postcode checker