EPC Price Check

Solar panels, heat pumps and insulation in Pensford conservation area

In the Pensford conservation area (Bath and North East Somerset), external wall insulation needs planning permission, and so does an air source heat pump on a wall or roof facing the road; one at the back or side, internal and loft insulation and solar panels on a roof slope normally do not. The area has 13 listed buildings; on a listed building solar panels and heat pumps are not permitted development at all and need planning permission and listed building consent. 76 homes inside the boundary have an energy certificate: 68% are solid-wall homes with no wall insulation, 4% heat with a gas boiler and 80% are rated D–G; 3 have a heat pump. EPC register November 2026; rules as at 21 October 2026.

Data: EPC register November 2026 (latest certificate per home), conservation area boundaries 3 November 2026, permitted development rules as at 21 October 2026 · calculated 5 November 2026 · Methodology and sources

76homes with an energy certificate
68%solid walls, no insulation
4%heated by a gas boiler
3heat pumps

Article 4: Bath and North East Somerset does not publish Article 4 areas on planning.data.gov.uk — check with the council.

What needs planning permission in Pensford

Work (house, not listed)In a conservation areaRule
Air source heat pump on a wall or roof facing the road, or nearer the road than the housePlanning permission neededPart 14 Class G, G.1(j)
Air source heat pump at the back or side (outdoor unit up to 1.5 m³, MCS Planning Standards, one per house — two on a detached house)No permission needed (permitted development), unless an Article 4 direction removes it — check with the councilPart 14 Class G
Solar panels on a pitched roof (up to 0.2 m proud, not above the ridge)No permission needed (permitted development), unless an Article 4 direction removes it — check with the councilPart 14 Class A, A.2(c)
Solar panels on a wall, balcony or roof enclosure facing the roadPlanning permission neededPart 14 Class A, A.2(e)
Solar panels on a flat roof (up to 0.6 m above the roof)Prior approval of appearance from the council, unless an Article 4 direction removes it — check with the councilPart 14 Class A, condition A(ba)
External wall insulation (render, cladding, timber, tiles)Planning permission neededPart 1 Class A, A.2(a)
Internal wall insulation, loft insulation, cavity wall insulationNot development: no planning permission—
Replacement windows and doors of similar appearanceNo permission needed (permitted development), unless an Article 4 direction removes it — check with the councilPart 1 Class A, A.3(a)

The homes in the area (latest certificate per home, n = 76)

WallsHomesShare
Solid wall (brick or stone), no insulation5268%
Cavity wall, insulated (as built or unspecified)1013%
Modern wall (U-value from the design)79%
Solid wall, internal insulation34%
Cavity wall, unfilled23%
Other or not known11%
Solid wall, insulated11%
HeatingHomesShare
Oil4255%
Electric (storage heaters, panels, boiler)2330%
LPG45%
Gas boiler34%
Heat pump34%
Solid fuel (wood, coal)11%
Loft / roof insulationHomesShare
No insulation912%
Under 200 mm1621%
200 mm or more2938%
Insulated (depth not recorded)1216%
Flat or other home above23%
Other811%
WindowsHomesShare
Double glazed6991%
Single glazed57%
Secondary glazing11%
Triple glazed11%

Energy rating: B 2 (3%) · C 13 (17%) · D 9 (12%) · E 38 (50%) · F 10 (13%) · G 4 (5%). Houses and bungalows: 92% of the homes; solar panels on 5% of the certificates. Most common build period on the certificates: before 1900. Designated: 11 May 1988.

Compared with Bath and North East Somerset and England

Share of homesPensfordAll 35 areas in Bath and North East SomersetEngland
Solid walls, no insulation68%53.0%48.7%
Gas boiler4%73.5%66.4%
Rated D–G80%—56.5%

Caveats

All conservation areas in Bath and North East Somerset · The rules for every conservation area

Guides: Heat pumps · Solar panels · External wall insulation · Replacement windows · Am I in a conservation area? Postcode checker