Solar panels, heat pumps and insulation in Annesley conservation area
In the Annesley conservation area (Ashfield), external wall insulation needs planning permission, and so does an air source heat pump on a wall or roof facing the road; one at the back or side, internal and loft insulation and solar panels on a roof slope normally do not. 492 homes inside the boundary have an energy certificate: 27.4% are solid-wall homes with no wall insulation, 96.5% heat with a gas boiler and 29.7% are rated D–G; 1 has a heat pump. EPC register November 2026; rules as at 21 October 2026.
Data: EPC register November 2026 (latest certificate per home), conservation area boundaries 3 November 2026, permitted development rules as at 21 October 2026 · calculated 5 November 2026 · Methodology and sources
492homes with an energy certificate
27.4%solid walls, no insulation
96.5%heated by a gas boiler
1heat pumps
Article 4: Ashfield does not publish Article 4 areas on planning.data.gov.uk — check with the council.
What needs planning permission in Annesley
Work (house, not listed)
In a conservation area
Rule
Air source heat pump on a wall or roof facing the road, or nearer the road than the house
Planning permission needed
Part 14 Class G, G.1(j)
Air source heat pump at the back or side (outdoor unit up to 1.5 m³, MCS Planning Standards, one per house — two on a detached house)
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 14 Class G
Solar panels on a pitched roof (up to 0.2 m proud, not above the ridge)
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 14 Class A, A.2(c)
Solar panels on a wall, balcony or roof enclosure facing the road
Planning permission needed
Part 14 Class A, A.2(e)
Solar panels on a flat roof (up to 0.6 m above the roof)
Prior approval of appearance from the council, unless an Article 4 direction removes it — check with the council
Replacement windows and doors of similar appearance
No permission needed (permitted development), unless an Article 4 direction removes it — check with the council
Part 1 Class A, A.3(a)
Listed buildings: none recorded inside the boundary; on a listed building, solar panels and heat pumps are not permitted development and need listed building consent.
Flats: 3% of the certified homes here are flats or maisonettes. Homes in a block of flats have no householder rights for alterations; heat pumps and solar have their own, tighter rules for blocks of flats.
The homes in the area (latest certificate per home, n = 492)
Walls
Homes
Share
Modern wall (U-value from the design)
218
44.3%
Solid wall (brick or stone), no insulation
135
27.4%
Cavity wall, insulated (as built or unspecified)
90
18.3%
Solid wall, external insulation
30
6.1%
Timber frame
6
1.2%
Cavity wall, filled
4
0.8%
Solid wall, internal insulation
4
0.8%
Cavity wall, unfilled
3
0.6%
Cavity wall, internal or external insulation
1
0.2%
Other or not known
1
0.2%
Heating
Homes
Share
Gas boiler
475
96.5%
Solid fuel (wood, coal)
11
2.2%
Communal heating
2
0.4%
Oil
2
0.4%
Electric (storage heaters, panels, boiler)
1
0.2%
Heat pump
1
0.2%
Loft / roof insulation
Homes
Share
No insulation
54
11.0%
Under 200 mm
54
11.0%
200 mm or more
133
27.0%
Insulated (depth not recorded)
31
6.3%
Flat or other home above
5
1.0%
Other
215
43.7%
Windows
Homes
Share
Double glazed
488
99.2%
Single glazed
4
0.8%
BCDE
Energy rating: A 2 (0.4%) · B 158 (32.1%) · C 186 (37.8%) · D 88 (17.9%) · E 40 (8.1%) · F 17 (3.5%) · G 1 (0.2%). Houses and bungalows: 97% of the homes; solar panels on 0.6% of the certificates. Most common build period on the certificates: 2014. Designated: 4 March 1999.
Compared with Ashfield and England
Share of homes
Annesley
All 5 areas in Ashfield
England
Solid walls, no insulation
27.4%
30.8%
48.7%
Gas boiler
96.5%
84.5%
66.4%
Rated D–G
29.7%
—
56.5%
Caveats
Certificates describe a home when it was assessed; 27% of these are from 2020 or later (latest 28 October 2026). “No insulation (assumed)” is the assessor's default for older walls.
The rules are England's national permitted development rules (General Permitted Development Order 2015, Schedule 2, as at 21 October 2026). They do not cover building regulations or a council's own conditions. This is not a planning decision: ask Ashfield if in doubt.
Boundary: Ashfield District Council via planning.data.gov.uk (entity 44001530, reference 8397, 24.2 ha). Homes are placed by the coordinates of their UPRN (OS Open UPRN); addresses are not shown.